Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (561/899) > >>
diyaudio:

--- Quote from: tiagobaracho on February 03, 2014, 01:44:59 am ---I GOT IT !!! I will make a how to in details in few minutes to you guys that are having problem as i did!!!

--- End quote ---
please do we will really appreciate it.
AndersAnd:

--- Quote from: diyaudio on February 03, 2014, 01:35:12 am ---RC5KEY1:  BCF38C.....   
RC5KEY2:  44A3403....     
XXTEAKEY: 50E3E8B8A71720...   
PUBKEY:   0200840010001809         
PRIVKEY:  04444000424137314533353943394136333435423731353741414432353035334236...   
SERIAL:   DS2D1....
--- End quote ---
I think your PUBKEY and PRIVKEY looks wrong. Why are these not hexadecimal values?
I have tried to extract the values from one of the .bin memory dumps uploaded here using the "rigup scan" command and it generates a keyfile that looks like this:

--- Code: ---RC5KEY1:        4155BFD82D429EA69B3EE7D7D59C8906
RC5KEY2:        B9BC53D8B8CE6CE3594555AA89556543
XXTEAKEY:       86F4A0930BC7ED276B2D6C2CE293535F
PUBKEY:         00A0581020E5C012
PRIVKEY:        005BCEE4DD323E4E
SERIAL:         DS2D154300287
--- End code ---
tiagobaracho:
How to Hack your DS2000 series :

1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. all buttons will unlight.
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update(may take 1 mins.... be patient)
5 - all of the buttons on the front panel will be lit.  Turn off the scope. Remove the pendrive. Turn on agaion
6 - check the new firmware version , should be now 00.02.01
7 - Connect to USB cable to PC and open up Ultra Sigma Software  ( you may need to install the NI-VISA full driver , google it and will find easy to download, from ni.com)
8 - On the Ultra Sigma software, click with the left button on your scope being listed, click on SCPI Panel Control, then click  Send & Read button (*IDN? command should be already wrote on the SCPI COMMAND, if not, please write it ). It will bring back something like :
RIGOL TECHNOLOGIES,DS2072A,DS2D154700708,020084001000E9BC3D59216F9F9A1DD30EFED1AE20F92000ABC495314FF8236E708F9A2C6E3F6E87D09019C79419FEA9E9F3862A12CA1DE90800819A17FCA12E500540003330313233345645645465333033374342323539363234343535354243343836453538424243353233314631353132443135383035353734463544413334
9- Get from ( 020084 till the end)  Copy and paste on HxD editor on  the middle column  ( which shows 02 00 84 00 10 00 E9 BC 3D 59 21 6F 9F 9A 1D D3..... so on )
10 - now, on the right side of the editor, just append your model serial number( DS2D1....... )  , no spaces, just append, and append more 00 after your model on the middle column.
11 - save the file on you hard drive , same folder as rigup exe, and open command prompt, go to the same folder as rigup and do : rigup ds2072a key.txt ( replace dS2072a  for the model you have, and replace key.txt for the filename you saved.
Now it will show you the serials !!!

No credit for me other the explaning... The guys did here ALL the hard work, but their level where so higher on the understand that for us that just wants to hack the scope, we got a little bit lost right ?
AndersAnd:

--- Quote from: tiagobaracho on February 03, 2014, 02:01:38 am ---RIGOL TECHNOLOGIES,DS2072A,DS2D154700708,020084001000E9BC3D59216F9F9A1DD30EFED1AE20F92000ABC495314FF8236E708F9A2C6E3F6E87D09019C79419FEA9E9F3862A12CA1DE90800819A17FCA12E500540003330313233345645645465333033374342323539363234343535354243343836453538424243353233314631353132443135383035353734463544413334
--- End quote ---
Does this work with the key values and serial you have posted here? I can't get it to work using these values. I just get this error message when typing rigup ds2072a key.txt after saving the hex file as key.txt:
Scanning 'key.txt' failed: No keys

I have attached the key.txt I generated with HxD for reference.
diyaudio:

--- Quote from: tiagobaracho on February 03, 2014, 02:01:38 am ---How to Hack your DS2000 series :

1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. all buttons will unlight.
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update(may take 1 mins.... be patient)
5 - all of the buttons on the front panel will be lit.  Turn off the scope. Remove the pendrive. Turn on agaion
6 - check the new firmware version , should be now 00.02.01
7 - Connect to USB cable to PC and open up Ultra Sigma Software  ( you may need to install the NI-VISA full driver , google it and will find easy to download, from ni.com)
8 - On the Ultra Sigma software, click with the left button on your scope being listed, click on SCPI Panel Control, then click  Send & Read button (*IDN? command should be already wrote on the SCPI COMMAND, if not, please write it ). It will bring back something like :
RIGOL TECHNOLOGIES,DS2072A,DS2D154700708,020084001000E9BC3D59216F9F9A1DD30EFED1AE20F92000ABC495314FF8236E708F9A2C6E3F6E87D09019C79419FEA9E9F3862A12CA1DE90800819A17FCA12E500540003330313233345645645465333033374342323539363234343535354243343836453538424243353233314631353132443135383035353734463544413334
9- Get from ( 020084 till the end)  Copy and paste on HxD editor on  the middle column  ( which shows 02 00 84 00 10 00 E9 BC 3D 59 21 6F 9F 9A 1D D3..... so on )
10 - now, on the right side of the editor, just append your model serial number( DS2D1....... )  , no spaces, just append, and append more 00 after your model on the middle column.
11 - save the file on you hard drive , same folder as rigup exe, and open command prompt, go to the same folder as rigup and do : rigup ds2072a key.txt ( replace dS2072a  for the model you have, and replace key.txt for the filename you saved.
Now it will show you the serials !!!

No credit for me other the explaning... The guys did here ALL the hard work, but their level where so higher on the understand that for us that just wants to hack the scope, we got a little bit lost right ?

--- End quote ---

thanks dude, that worked, don't forget when using windows 8 you need to run from the command prompt as administrator  I had an issue not running it as an admin.. Now for the moment of truth try them keys... :)

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod