| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (563/899) > >> |
| tiagobaracho:
The two pictures say it all !! I am so happy that you guys did... you guys have just "transformed" a 70 mhz oscilloscope on a 200mhz .... Thats on another price class.. Thanks very much once again! |
| diyaudio:
success! Its been a long night for me, I just wanted to give a very humble thank you to everyone that participated, especially to ones who work in the silicon shadows a really big thank you I/we really appreciate this. |
| tiagobaracho:
Just to keep complete ! How to Hack your DS2000 series : Download the firmware: https://mega.co.nz/#!MdcEWTgL!0EEmSr-Q6TxaFSsyEmjhRrgqDvFCoXg9K49BalL5Uxc Download the rigup: https://mega.co.nz/#!qAkUkTZB!XG12bUKhIz4CmQt6DbBnGRMvEe5AvUjEaBxi4R03tw8 or https://www.hightail.com/download/elNKUXV1dzg5bEJ2TzhUQw 1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive. 2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. all buttons will unlight. 3- insert the USB stick into the front panel. 4- Wait for the end of the firmware update(may take more than 1 min.... be patient) 5 - all of the buttons on the front panel will be lit. Turn off the scope. Remove the pendrive. Turn on again 6 - check the new firmware version , should be now 00.02.01 7 - Connect to USB cable to PC and open up Ultra Sigma Software ( you may need to install the NI-VISA full driver , google it and will find easy to download, from ni.com) 8 - On the Ultra Sigma software, click with the left button on your scope being listed, click on SCPI Panel Control, then click Send & Read button (*IDN? command should be already wrote on the SCPI COMMAND, if not, please write it ). It will bring back something like : RIGOL TECHNOLOGIES,DS2072A,DS2D154700708,020084001000E9BC3D59216F9F9A1DD30EFED1AE20F92000ABC495314FF8236E708F9A2C6E3F6E87D09019C79419FEA9E9F3862A12CA1DE90800819A17FCA12E500540003330313233345645645465333033374342323539363234343535354243343836453538424243353233314631353132443135383035353734463544413334 9- Get from ( 020084 till the end) Copy and paste on HxD editor on the middle column ( which shows 02 00 84 00 10 00 E9 BC 3D 59 21 6F 9F 9A 1D D3..... so on ) 10 - now, on the right side of the editor, just append your model serial number( DS2D1....... ) , no spaces, just append, and append more 00 after your model on the middle column. 11 - save the file on you hard drive , same folder as rigup exe, and open command prompt, go to the same folder as rigup and do : rigup ds2072a key.txt ( replace dS2072a for the model you have, and replace key.txt for the filename you saved. Now it will show you the serials !!! No credit for me other the explaining... The guys did here ALL the hard work! |
| Rigol-Friend:
Hi everybody, here a small info about Rigol DSA815-TG: After pressing following keys TRACE > TG > MARKER FCTN > MEAS SETUP > SYSTEM > PRINT SETUP > STORAGE you will get a hidden menu called "Service" at the second page of the system-menu. Not permanent, after the next turn-on it's hidden again. Next days I will examine this new menu, maybe it's helpfull. ??? Have a nice day Rigol-Friend |
| cybermaus:
--- Quote from: tiagobaracho on February 03, 2014, 02:57:03 am ---The two pictures say it all !! --- End quote --- I sometimes see these thanks pictures. I really wonder if the guru's and owners if this thread should not ask the rest of us to tone it down. I do appreciate the wonderful and unbelievable skill and effort of course. And a thank you note is in order. But its one thing for Rigol to dig through text to count the number people using this. But quite another to give them large screaming visuals they can then use in power-point presentations to their managers. Too much hurrahs, and the firmware will close even more. |
| Navigation |
| Message Index |
| Next page |
| Previous page |