Products > Test Equipment

Sniffing the Rigol's internal I2C bus

<< < (574/899) > >>

anson80:

--- Quote from: zombie28 on February 01, 2014, 09:25:36 pm ---
--- Quote from: tiagobaracho on February 01, 2014, 08:16:38 pm ---Guys... Sorry to bother..
I bought one Rigol DS2072A
It shows Software version 00.02.00 and Hardware version 2.0... Is that possible to use the 200 mhz and high memory settings ?
I have been reading a lot of pages in this thread but i could not find....
Thanks

--- End quote ---

You can use either my first firmware patch (https://mega.co.nz/#!FFk10SCY!UuWPXyqZwmca00pa2clOth1ryh1Z-AAgJg2yibfoUw0) with old keygen (riglol.3owl.com) or my newest patch from the post above with the new tirulerbach's keygen (if he decides to publish it).

--- End quote ---

zombie28 !great!
What is the difference between the first firmware patch and the newest patch?
Just don't need to manually enter the keygen on the oscilloscope?

hari:

--- Quote from: anson80 on February 05, 2014, 10:53:05 am ---What is the difference between the first firmware patch and the newest patch?

--- End quote ---
As you seem to have missed some of the last posts, let me provide you with a short update: The old patch allows to use the keys from the old keygen, the newest patch will spit out needed key information to generate keys with the new keygen.

at2:
Hi tiagobaracho,

you wrote:
worked like a charm!!!
Now it shows all official Version and only one line with 300m bandwidth

I cant belive it has the same hardware as the 2500 usd with 300mhz... and i paid only 788 USD and you guys from this thread made it happen !
Thanks!
So.. if we need warranty, all need to do is to uninstall the serial and update to stock firmware right ?
And probably those options will work even on future firmware updates ? since its a serial number ?( maybe isnt worthy updating..... the team is winning... why risk , right ?)

My question:

does your DS 2302A work stable as there it is mentioned in this forum not to be. So what is actually right?

at2

idpromnut:
@at2: I installed the same 300Mhz BW option and then reverted the firmware back to the unlatched version and the scope (with my minimal use) has seemed stable enough. I will continue to do more testing.

As for the DS2072A being the same HW, please remember that no one with a DS2302A (to my knowledge) has posted test results on performance, so there is nothing to compare against just yet.

at2:
@ispromnut
Thank you for your fast reply.
You are right.Testing this 300MHz mode may be the answer. 

at2

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod