Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (617/899) > >>
ad0hg:
My DS1104Z-S arrived on Saturday.  I've been combing the thread but no good working demo bypass keys. (that work it appears they have changed the keys)  Other than that the scope is great works like a charm no issues rock solid.  Worth every hard earned cent. 
Cheers all!
Steve
Gallymimus:

--- Quote from: ad0hg on March 18, 2014, 01:00:36 am ---My DS1104Z-S arrived on Saturday.  I've been combing the thread but no good working demo bypass keys. (that work it appears they have changed the keys)  Other than that the scope is great works like a charm no issues rock solid.  Worth every hard earned cent. 
Cheers all!
Steve

--- End quote ---

What firmware version is on your scope?   I've had no trouble with several DS1074-S and updated them to the latest firmware (as of a few weeks ago that is)
eV1Te:

--- Quote from: Gallymimus on March 18, 2014, 05:17:54 am ---
--- Quote from: ad0hg on March 18, 2014, 01:00:36 am ---My DS1104Z-S arrived on Saturday.  I've been combing the thread but no good working demo bypass keys. (that work it appears they have changed the keys)  Other than that the scope is great works like a charm no issues rock solid.  Worth every hard earned cent. 
Cheers all!
Steve

--- End quote ---

What firmware version is on your scope?   I've had no trouble with several DS1074-S and updated them to the latest firmware (as of a few weeks ago that is)

--- End quote ---

Which is the firmware version you have? The one I have at the moment is 00.02.01.SP1

I have not read anything new about the 500 uV option, have the offset calibration issue been solved by now?

And finally is there any tool out there that can read the WFM files from the DS1000Z scopes which allows conversion to CSV? Rigols own software suites can not do it  |O
staze:

--- Quote from: Rigol-Friend on March 06, 2014, 06:09:24 pm ---Now my question: Does everyone knows, is it possible to change the inptut impedance like the "A"-Version between 1 Mohm and 50 Ohm directly at the scope??

--- End quote ---

I have not seen anyway to do this. Just read through the rest of the thread, and not seeing anyone having figured out how to do this. =/
greenwk2:
I have a DS2102A-S with serial number DS2E15xxxxxxx.

The code NSEH gives me all options no bandwidth change
The codes NSEQ, NS8H are invalid
The code NSFH gives me all options no bandwidth change
The code NSFQ gives me 200 MHz with all options
The code NS8Q gives me 200 and 300 MHz with all options

Given this information does anyone have an idea what might be the right code to get 300MHz without also having 200 MHz? Does it matter?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod