| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (661/899) > >> |
| sacherjj:
--- Quote from: alexwhittemore on June 09, 2014, 10:44:15 pm ---Do they not come with trials? I know on the DS1104z they all came with trials. --- End quote --- Only 2 of the 5 options have trials on my DP832. Monitor and Analyze, I think they were. Ethernet, RS-232, Digital IO had no trial. |
| nack:
Mine came with all the trail options available. Strange... |
| johnlondon:
I have a brand new DS2072A with software 00.03.00.SP1 and I have generated the key but the DSO reports "licence is unavailable". Am I right in thinking that the private key that I need to use in rikey.c is the one that is listed here: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/585/? Or do I have to enter a different private key? Is there a way of checking that the tool used to generate the key is doing it correctly, for example by entering a different serial number and comparing it to a known good licence key? |
| AintBigAintClever:
--- Quote from: johnlondon on June 12, 2014, 07:18:35 am ---I have a brand new DS2072A with software 00.03.00.SP1 and I have generated the key but the DSO reports "licence is unavailable". Am I right in thinking that the private key that I need to use in rikey.c is the one that is listed here: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/585/? Or do I have to enter a different private key? Is there a way of checking that the tool used to generate the key is doing it correctly, for example by entering a different serial number and comparing it to a known good licence key? --- End quote --- Aren't those instructions for the DS2072? For the DS2072A the instructions are different as the private key is now unique to each scope. Everything you need can be found at http://www.gotroot.ca/rigol/, including instructions. Basically you've got a choice of:- 1) Flash firmware with a key dump firmware, dump key, generate code, apply code, upgrade to latest firmware. 2) Flash firmware with a "non-A keys" firmware, generate code at http://www.gotroot.ca/rigol/riglol/, apply code, stay on modified firmware. If you only have partial success with option 1 (e.g. open up options but stuck at 70MHz) option 2 is a good fallback and is what I did. |
| AndersAnd:
--- Quote from: johnlondon on June 12, 2014, 07:18:35 am ---I have a brand new DS2072A with software 00.03.00.SP1 and I have generated the key but the DSO reports "licence is unavailable". Am I right in thinking that the private key that I need to use in rikey.c is the one that is listed here: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/585/? Or do I have to enter a different private key? Is there a way of checking that the tool used to generate the key is doing it correctly, for example by entering a different serial number and comparing it to a known good licence key? --- End quote --- For the DS2000A series just use this DS2000A Upgrade Utility: https://www.eevblog.com/forum/testgear/ds2000a-upgrade-utility/ |
| Navigation |
| Message Index |
| Next page |
| Previous page |