| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (675/899) > >> |
| samertje:
--- Quote from: samertje on June 26, 2014, 04:27:04 pm ---Good day! We received a Rigol DS4014 yesterday. I scanned and read through this huge thread and also found this directory: http://www.gotroot.ca/rigol/ As I understand, to upgrade to 500MHz I need to use the DS2000A upgrade utility and the DS4000update_00.02.01.00.03.GEL Can anyone confirm this? Also want to upgrade my DG4062. How to do this? Cheers Sam --- End quote --- So I was wrong. I'm not finding the right info in this thread. Anyone please help? Link to how to upgrade? Hopless, but happy Sam |
| navzptc:
--- Quote from: Purevector on June 27, 2014, 02:27:52 am --- Use rigup to get license for NS8N (All options - 56M + 300MHz) and install on scope in any of the methods described in this thread. --- End quote --- Many thanks for this - It worked a treat ;D Now have 300MHz in addition to all other options! |
| samertje:
Is upgrading DS4000 only possible via JTAG? Noob wants to know |
| AintBigAintClever:
--- Quote from: Purevector on June 27, 2014, 02:27:52 am ---Ok, I got 300MHz upgrade and all options working on my DS2072A which was not able to upgrade to 300MHz. Here is what I did: 1-Install all options, no bandwidth upgrade (NSEH) using rigup or the upgrade utility. 2-Use rigup to get license for NS8N (All options - 56M + 300MHz) and install on scope in any of the methods described in this thread. The result will be a scope with all options AND 300MHz!!! Success! :-+ --- End quote --- PERFECT! :-+ I did it the other way round on mine (NS8N first, then NSEH) and that worked as well. Now got all the goodies on 00.03.00.01.03 firmware. Thank you! ;D |
| AintBigAintClever:
--- Quote from: samertje on June 27, 2014, 04:29:16 pm ---Is upgrading DS4000 only possible via JTAG? Noob wants to know --- End quote --- On the 2000 series the code can be entered using RIGOL Ultra Sigma, take a look at the PDF in http://gotroot.ca/rigol/ Alternatively the 2000 allows keys to be entered directly into the scope. Utility Menu -> page down -> Options -> Setup -> Editor There's some 4000 stuff here, I don't know if it's been superseded but it refers to "trigger option install" which suggests to me that it too is done via Ultra Sigma. Lots more DS4000 info at http://rigol.avotronics.co.uk/msods4000-series/ |
| Navigation |
| Message Index |
| Next page |
| Previous page |