Products > Test Equipment

Sniffing the Rigol's internal I2C bus

<< < (675/899) > >>

samertje:

--- Quote from: samertje on June 26, 2014, 04:27:04 pm ---Good day!

We received a Rigol DS4014 yesterday. I scanned and read through this huge thread and also found this directory:
http://www.gotroot.ca/rigol/

As I understand, to upgrade to 500MHz I need to use the DS2000A upgrade utility and the DS4000update_00.02.01.00.03.GEL
Can anyone confirm this?

Also want to upgrade my DG4062. How to do this?

Cheers
Sam

--- End quote ---

So I was wrong. I'm not finding the right info in this thread. Anyone please help?
Link to how to upgrade?
Hopless, but happy

Sam

navzptc:

--- Quote from: Purevector on June 27, 2014, 02:27:52 am ---
Use rigup to get license for NS8N (All options - 56M + 300MHz) and install on scope in any of the methods described in this thread.


--- End quote ---

Many thanks for this - It worked a treat  ;D

Now have 300MHz in addition to all other options!

samertje:
Is upgrading DS4000 only possible via JTAG?
Noob wants to know

AintBigAintClever:

--- Quote from: Purevector on June 27, 2014, 02:27:52 am ---Ok, I got 300MHz upgrade and all options working on my DS2072A which was not able to upgrade to 300MHz.  Here is what I did:

1-Install all options, no bandwidth upgrade (NSEH) using rigup or the upgrade utility.
2-Use rigup to get license for NS8N (All options - 56M + 300MHz) and install on scope in any of the methods described in this thread.

The result will be a scope with all options AND 300MHz!!!  Success!  :-+

--- End quote ---

PERFECT!  :-+
I did it the other way round on mine (NS8N first, then NSEH) and that worked as well. Now got all the goodies on 00.03.00.01.03 firmware. Thank you!  ;D

AintBigAintClever:

--- Quote from: samertje on June 27, 2014, 04:29:16 pm ---Is upgrading DS4000 only possible via JTAG?
Noob wants to know

--- End quote ---
On the 2000 series the code can be entered using RIGOL Ultra Sigma, take a look at the PDF in http://gotroot.ca/rigol/
Alternatively the 2000 allows keys to be entered directly into the scope. Utility Menu -> page down -> Options -> Setup -> Editor

There's some 4000 stuff here, I don't know if it's been superseded but it refers to "trigger option install" which suggests to me that it too is done via Ultra Sigma.
Lots more DS4000 info at http://rigol.avotronics.co.uk/msods4000-series/

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod