| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (676/899) > >> |
| Tilman:
--- Quote from: Purevector on June 27, 2014, 02:27:52 am ---Ok, I got 300MHz upgrade and all options working on my DS2072A which was not able to upgrade to 300MHz. Here is what I did: 1-Install all options, no bandwidth upgrade (NSEH) using rigup or the upgrade utility. 2-Use rigup to get license for NS8N (All options - 56M + 300MHz) and install on scope in any of the methods described in this thread. The result will be a scope with all options AND 300MHz!!! Success! :-+ By the way, you can't use the upgrade utility to install NS8N since that program always uninstalls all options before installing new ones. --- End quote --- not working for me, NSEH -> License is unavliable.... only NSEQ works for me... |O |
| BTO:
MY God, 229 Pages and counting... I can't believe this thread is still going LOL It's Alive... Alive. Ok. to get serious for a second I have a Rigol DS2072A, it was loaded with the 2.0 Software from the factory, it was originally 70 MHz Now SUCCESSFULLY UPGRADED TO 300MHz All options Unlocked and 56 Mpt Memory Depth IF ANYONE NEEDS ANY HELP, I AM HERE TO HELP, and Im happy to do it So.. Newbies if you have a DS200A let me know I know this is a Huge thread, I've gone through it in great detail NO NEED TO DOWNLOAD ANYTHING I'll supply it all From a Cloud if enough people want it I'll Just upload it for all of you to have access to , For.. Say,.. a Month or so, if you like However it's easier if you guys just skype me, that's what a few people have been doing There's 2 Main Issues that Get everyone 1. Make sure that your Scope is Set to COMPUTER for the USB Port, if it's set to PictBridge and considering that the front USB is PictBridge, Your Scope wont detect in the computer and you'll be scratching your head as to why 2. Putting the Scope into Firmware Update Mode is a little tricky and takes a correct explanation. which is where skype comes in. the answer to issues 1 is go to UTILITY / IO SETUP / USB DEVICE Make sure the value says COMPUTER the answer to 2 is Start with Scope OFF Now.. before switching it ON Find the Power Button, DON'T PRESS IT YET, Put your left thumb on the power button Now, with your Right Thumb find the ORANGE HELP Button, Put your thumb on it Now.. Press the power button and STRAIGHT AWAY Press the HELP button, don't wait to see the RIGOL screen if you see the rigol screen you need to do it quicker YOU WILL KNOW THAT YOU HAVE DONE IT CORRECTLY IF....... the button in the top right corner labelled SINGLE Turns Solid Orange that means the meter is upgrade Mode Now pop in your USB stick and the CH 1 Button should flash Green this indicates good communication with the USB Device and you just Wait 2 mins and it's done if anyone needs any further assistance, Let me know I'm at martin@btotechnicalexperts.com.au be cool guys |
| MrKrabs:
--- Quote from: samertje on June 27, 2014, 03:55:00 pm --- --- Quote from: samertje on June 26, 2014, 04:27:04 pm ---Good day! We received a Rigol DS4014 yesterday. I scanned and read through this huge thread and also found this directory: http://www.gotroot.ca/rigol/ As I understand, to upgrade to 500MHz I need to use the DS2000A upgrade utility and the DS4000update_00.02.01.00.03.GEL Can anyone confirm this? Also want to upgrade my DG4062. How to do this? Cheers Sam --- End quote --- So I was wrong. I'm not finding the right info in this thread. Anyone please help? Link to how to upgrade? Hopless, but happy Sam --- End quote --- For the DS4000, you only need MrKrab's firmware at http://www.gotroot.ca/rigol :) |
| samertje:
--- Quote from: MrKrabs on June 29, 2014, 11:23:45 pm --- For the DS4000, you only need MrKrab's firmware at http://www.gotroot.ca/rigol :) --- End quote --- 1. I used MrKrabs firmware on a compatible stick 2. Booted into blackscreen using help button 3. Entered the stick in the USB. Channel 1 didn't blink, but immeadiatly went solid together with run/stop button solid red After this nothing happens. I hope this helps some of you... Any help? Thank you for all replies :) |
| BloodyCactus:
did you test the usb stick by saving a screen image to it to make sure the ds4k can see it properly? on my ds2k, I had to wait a bit before putting the usb stick in, too quick and it did not seem to load. tried again, waited like 30 seconds after the button presses then put it in and it recognised it correctly right away. |
| Navigation |
| Message Index |
| Next page |
| Previous page |