Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (679/899) > >>
Julian:
Hello guys,

I am interested in the MSO4000 series. Is it firmware compatible with the DSO4000 series? Meaning that I can use MrKrabs Frimware form here: http://gotroot.ca/rigol/ ?
If so do these option codes apply to the MSO4000: http://gotroot.ca/rigol/DS4000%20Series%20Options.txt ?
MarcelM:
Hi all,

Got my MSO2072A in last week, running Software version 00.03.00.01.03
Since I already opened up the scope in anticipation of my JTAG interface,
I can take some pictures of the inside, if anyone's interested.

If I understand the previous 230 pages correctly, the safest way for me to unlock features is to collect a memory dump of the BF, and ask one of the software gurus on this forum to extract the private key from that.
(Since the "patched" firmware is apparently not MSO-aware, I don't feel comfortable downgrading to that)

Here's hoping I'll end up with an unlocked MSO2302A    ;)

Best regards,
Marcel
adi101:
Hi All,

I have recently acquired my DS2072A scope and I am unable to make the upgrade utility work.

For some reason, the boot loader doesn't accept any older versions other than the latest .GEL file (00.03.00.01.03).
Could I ask one of you gurus to make a new modified FW starting from the latest version available?
Or perhaps, if there is another way, could you please point it to me?

Software version: 00.03.00.01.03 (in short, 00.03.00.SP1)
Hardware version: 1.0.2.0.2 (in short, 2.0)

SPU: 04.00.07
WPU: 01.01.03
CCU: 12.29.00
MCU: 00.06

Many thanks!
hpux735:

--- Quote from: Weisserrabe on June 26, 2014, 02:04:39 pm ---my DP832 arrived yesterday, firmware 01.09 and only Analyzer and Monitor options are as trial available :(
also the riglol key generator doesn't work, after entering the generated key it just says "wrong serial number" (I double checked if I entered the correct one)
it seems that it's since v01.09 and so far no working hack?

--- End quote ---

Same here.  I couldn't downgrade the firmware to 01.06 or 01.08. :(
roema:
I have a DSA815-TG with version 00:01:09.

unfortunately I have seen too late that the keygen does not work with this version. Now I have made a downgrade to version 00:01:05, unfortunately the keygen does not work anyway.

Motherboard: 00:03
Radio Frequency: Board: 0:04
Digital Board: 0:04
Firmware: 00:01:05
Boot: 00:01:02

Maybe someone can give me info.

Downgrade Procedere:

From 09 -> 08 with Power & Preset Button
From 08 -> 06 with normal USB
From 06 -> 05 with normal USB

Thank you so much!

roema
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod