Products > Test Equipment

Sniffing the Rigol's internal I2C bus

<< < (680/899) > >>

ted572:

--- Quote from: roema on July 09, 2014, 12:29:41 am ---I have a DSA815-TG with version 00:01:09.

unfortunately I have seen too late that the keygen does not work with this version. Now I have made a downgrade to version 00:01:05, unfortunately the keygen does not work anyway.

roema

--- End quote ---

roema:

Is it 1.  That the Keygen doesn't  work (as in, it will not generate a key code)?  If this is the case, did you leave an extra space or character (such as a period after the Serial) with the entry for the Serial, or Option? 

or,  2. That the DSA815-TG won't accept the Keygen's resultant key code to open the Option(s) for you?

Please reply here to me, or via a PM.

You also may want to post instead to EEVblog 'Spectrum Analyzer - Rigol DSA815', at the following:
https://www.eevblog.com/forum/testgear/spectrum-analyzer-rigol-dsa815/msg473658/#msg473658

    Ted572

roema:
ted572:

It works!
I have found MY error, i have not changed the AAAA in keygen..

Thanks for your post!

roema

motocoder:
Is it possible to update the first post in the thread to be summary with links? I tried to find the info that I needed, but gave up after about 40 pages...

Anyway, I have a Rigol 2072 (NOT the A version), into which I have installed the keys generated by an older version of riglol. I have two problems:

1) I used what was later determined to be an invalid device option code to generate my keys. I'm not sure if that is the cause of #2.
2) The scope is locking up more frequently than I would like. It tends to happen about once every 2 or 3 times I use it.

So I'd like to uninstall the keys an upgrade the firmware to the latest version that still allows me to install the unlock keys. Can someone please give me instructions or pointers to the right posts to:

1) Uninstall the keys.
2) What latest firmware is safe to use and where to get it (I assume if I ask Rigol, they'll send me the latest version which is probably incompatible)

Thanks

Teneyes:

--- Quote from: motocoder on July 09, 2014, 07:18:02 am ---1) Uninstall the keys.
2) What latest firmware is safe to use and where to get it (I assume if I ask Rigol, they'll send me the latest version which is probably incompatible)

--- End quote ---
@Motocoder
#1) To uninstall all options, use SCPI command with Ultra Sigma from Rigol
http://www.rigol.com/prodserv/Waveform%20Generators/software/?act=view&itemid=354
"SYSTEM:OPTION:UNINSTALL"

#2) See:
https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg158659/#msg158659

motocoder:

--- Quote from: Teneyes on July 09, 2014, 07:35:06 am ---
--- Quote from: motocoder on July 09, 2014, 07:18:02 am ---1) Uninstall the keys.
2) What latest firmware is safe to use and where to get it (I assume if I ask Rigol, they'll send me the latest version which is probably incompatible)

--- End quote ---
@Motocoder
#1) To uninstall all options, use SCPI command with Ultra Sigma from Rigol
http://www.rigol.com/prodserv/Waveform%20Generators/software/?act=view&itemid=354
"SYSTEM:OPTION:UNINSTALL"

#2) See:
https://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/msg158659/#msg158659

--- End quote ---

Thank you, Teneyes. From the link you provided, it looks like FW#00.03.00.01.03 is the latest version. Is this version compatible with the keys generated by Riglol, or do I need to use an older version of the firmware for that?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod