Products > Test Equipment
Sniffing the Rigol's internal I2C bus
motocoder:
I uninstalled all options, and was re-entering a code. It locked up while entering the code! So seems my lock-ups are not related to the 300 MHz option...
Sparky:
--- Quote from: mojo-chan on July 09, 2014, 09:03:15 pm ---Is the DP832 firmware 00.09.01 still un-hackable at this stage?
--- End quote ---
Sort of correct; the latest firmware is actually 00.01.09.00.01 (date 12/27/2013) and bootloader 01.06 (date 12/27/2013).
Yes, still un-hackable. (No further investigation that I'm aware of since the original hack.)
josem:
--- Quote from: Sparky on July 10, 2014, 04:33:59 am ---
--- Quote from: mojo-chan on July 09, 2014, 09:03:15 pm ---Is the DP832 firmware 00.09.01 still un-hackable at this stage?
--- End quote ---
Sort of correct; the latest firmware is actually 00.01.09.00.01 (date 12/27/2013) and bootloader 01.06 (date 12/27/2013).
--- End quote ---
Telonic in the UK and already listing 00.01.10 as the latest firmware for the DP832.
http://www.rigol-uk.co.uk/ProductDetails.asp?ProductCode=FIRMTEST#.U74xXq5QZ3s
Not sure if this is 100% accurate and what changes it would include...
ted572:
--- Quote from: motocoder on July 10, 2014, 02:02:01 am ---
--- Quote from: ted572 on July 09, 2014, 10:58:49 am ---Re. Post #3442 by 'motocoder':
--- End quote ---
Thanks, Ted. Did you mean to say clear FRAM by holding the F6 key during boot, or is it actually F7? The instructions that Teneyes linked to above say F6. I didn't notice any messages about clearing FRAM - does it do anything to indicate that's actually happened?
Regarding the 300MHz BW option, I do indeed have that enabled. I even forked over some money for the 300MHz probes, so it is very disappointing to learn that it causes issues...
--- End quote ---
Yes, you are correct the Clear FRAM key is F6 (not F7). I'm sorry for the error, and thank you for catching it. I also edited my information above with the correct key reference.
Rigby:
--- Quote from: josem on July 10, 2014, 06:36:37 am ---
--- Quote from: Sparky on July 10, 2014, 04:33:59 am ---
--- Quote from: mojo-chan on July 09, 2014, 09:03:15 pm ---Is the DP832 firmware 00.09.01 still un-hackable at this stage?
--- End quote ---
Sort of correct; the latest firmware is actually 00.01.09.00.01 (date 12/27/2013) and bootloader 01.06 (date 12/27/2013).
--- End quote ---
Telonic in the UK and already listing 00.01.10 as the latest firmware for the DP832.
http://www.rigol-uk.co.uk/ProductDetails.asp?ProductCode=FIRMTEST#.U74xXq5QZ3s
Not sure if this is 100% accurate and what changes it would include...
--- End quote ---
Until there is a very good reason to upgrade, I don't think upgrading would be a great idea.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version