Products > Test Equipment
Sniffing the Rigol's internal I2C bus
Circlotron:
Who here is going to be enterprising enough to produce a front panel RIGLOL sticker available to all of us with suitably hacked scopes?
hematose:
I can confirm that using DSAE and other option codes on my MSO1074Z with this private key (trimmed the leading two zeros) does not work.
I'd be surprised if it was the option codes that were the problem though. The format seems to be pretty similar between the other scopes.
Maybe what is going on is that the LA functions are implemented as a special option so that there's another free bit that needs to be set to work with the MSO scopes?
rmd79:
I think its fairly certain that the keys being generated by riglol are not going to work without some further changes somewhere.
Running './rigup info mso1074z-s.keys <key>" on a key that my scope accepts works and the key can be verified as OK.
Running the same command on a key generated by riglol (modified with the private key I found earlier) does not work, and my scope won't accept them either. So, it looks like the keys can be verified but not created at the moment.
ted572:
I posted the following new Rigol 2014 manuals:
DP800 2014 Calibration Guide.pdf
is at > https://www.eevblog.com/forum/testgear/rigol-dp832-firmware-updates-and-bug-list/msg512521/#msg512521
DP800 Performance Verification Manual.pdf
is at > http://beyondmeasure.rigoltech.com/acton/attachment/1579/f-050d/1/-/-/-/-/DP800%20Performance%20Verification%20Guide.pdf
DSA800 Programming Guide PDF
ia at > http://www.filedropper.com/dsa800programmingguidepdf
DG4000 Calibration Guide.pdf
is at > https://www.eevblog.com/forum/testgear/dg4000-a-firmware-investigation/msg512569/#msg512569
DG4000 Performance Verification Guide.pdf
is at > https://www.eevblog.com/forum/testgear/dg4000-a-firmware-investigation/msg512565/#msg512565
DSA815 Service Guide.pdf
is at > https://www.eevblog.com/forum/testgear/spectrum-analyzer-rigol-dsa815/msg512514/#msg512514
DSA815 Performance Verification Guide.pdf
is at > https://www.eevblog.com/forum/testgear/spectrum-analyzer-rigol-dsa815/msg512933/#msg512933
DSA815 10MHz Clock Frequency Adjustment.pdf (10MHz Frequency Standard) Note: This procedure is not new.
is at > https://www.eevblog.com/forum/testgear/spectrum-analyzer-rigol-dsa815/msg512575/#msg512575
DS2000 Performance Verification Guide.pdf:
is at > http://beyondmeasure.rigoltech.com/acton/attachment/1579/f-04ce/1/-/-/-/-/DS2000%20Performance%20Verification%20Guide.pdf
ted572:
Installing DSA815 Options on units with firmware 00.01.09.00.07 and with BOOT Loader 03.
.
Note: This will NOT work with units supplied from Rigol with Pre-installed .09 FW and Boot Loader .04.
Go to > https://www.eevblog.com/forum/testgear/spectrum-analyzer-rigol-dsa815/msg513125/#msg513125
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version