Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (733/899) > >>
Bud:
I see.  Just in case, worked on my Win 7 x64. May be you could check if the rigup folder in not read-only, and may be try running a command prompt as Administrator.

Also may try to extract the whole 32Mb data from the scope and run rigup against it, who knows.
danander11:
A million thanks to all of you...

Turns out that with the 00.03.01 firmware, I had to use the 32MB dump to get it to work...

Also, The win7 box would always show a blank txt file with  0kb size.  I copied the two txt files to a stick and opened them in a win8 box and there they were.

It now seems that I now have a fully functional 2302.

I'm a happy-chappy indeed....

Cheers everyone.
sptm14a:

--- Quote from: msraya on November 03, 2014, 12:55:07 pm ---I just received a new MSO1074-S.

Someone know when the new code for the keygen will be avalaible?
The old keygen does not work with firmware 00.04.01.SP2.

Someone can put the new key table for these models to update the keyen?

--- End quote ---

riglol uses a hardcoded set of keys which makes it rather useless for MSO1000. The problem is that some of the keys that MSO uses for license validation are different for each device. A modified rigup can be used to generate valid licenses, but it needs a list of keys that can only be dumped via JTAG. Unfortunately, unlike 2000 series, DS/MSO1000 does not seem to have a way to dump memory by any means other than opening the scope and connecting a jtag. I am trying to find a way to not require memory dump for license generation, no luck so far.

msraya:
Thank You for share your knowledge!

So, I want to know how you modificated the rigup code.
You use more characters in the serial number, or only change the private key, or what?

Regards
Manuel
ted572:
There is a new issue with 'Rigol DS1000Z & DS2000 Oscilloscope Jitter' related to the Trigger mode/method.    See ->  https://www.eevblog.com/forum/blog/eevblog-683-rigol-ds1000z-ds2000-oscilloscope-jitter-problems/msg550964/#msg550964   This is already up to 12 pages in only two days.  I'm posting this alert here because we should all at least be advised that this issue is being discussed. I also believe that some DS4000 users are experiencing the trigger jitter issue (with the AC trigger mode).
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod