Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (758/899) > >>
pa3bca:
I know I can request the latest DSA815-TG firmware (00.01.12.00.02) from Rigol, but, but...
Is there anyplace I can download this version directly?
I really would like to have that Log x-axis.

hpux735:

--- Quote from: Howardlong on December 29, 2014, 09:52:22 pm ---
--- Quote from: Wall-E on December 29, 2014, 08:14:52 pm ---
--- Quote from: Howardlong on December 29, 2014, 08:04:34 pm ---Increasing the lower TG limit from -30dBm to -20dBm is a downgrade in my eyes.

--- End quote ---

This is kind of like RPN (Reverse Polish Notaion) because I believe they meant to say that the TG Output lower limit was changed from -20dBm to -30dBm.

--- End quote ---

...except that the default TG setting on the example I have here without the "upgrade" is already -30dBm, so I fear they're heading in the wrong direction. For some high gain low noise preamps, -20dBm will be a very strong signal indeed. Yet more external attenuation I guess!

--- End quote ---

I just checked on mine.  I have 01.08 and my TG only goes down to -20dBm.  What firmware are you running?  The extra 10dB of attenuation would be more valuable to me than a logarithmic x axis (though, I wouldn't turn it down).  Is there any definitive word on TG amplitude in 01.12 and whether all the riglol hacks still work?

Thanks!
Howardlong:
It's 1.09.
Teneyes:
New Firmware for DS1000Z and MSO/DS2000 Here
KD0RC:

--- Quote from: hpux735 on December 31, 2014, 02:37:04 am ---
I just checked on mine.  I have 01.08 and my TG only goes down to -20dBm.  What firmware are you running?  The extra 10dB of attenuation would be more valuable to me than a logarithmic x axis (though, I wouldn't turn it down).  Is there any definitive word on TG amplitude in 01.12 and whether all the riglol hacks still work?

Thanks!

--- End quote ---

TG output now definitely goes from 0 to -20 dBm with firmware version 01.12.00.02 and all hacks stay in place.

Len
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod