| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (823/899) > >> |
| DaBone_206:
Hello everybody, i have a Problem with my Rigol MSO1074zs. I want to unlock all functions but it doesn't works. I run the Load Dump with an SEGGER ARM Flascher and I use this Rigup Software http://gotroot.ca/rigol/rigup-0.4.1-mso1000z.zip to unlock. But my generated Keys goes wrong. :-\ What can i do? |
| hammy:
--- Quote from: DaBone_206 on April 29, 2016, 12:49:56 pm ---I run the Load Dump with an SEGGER ARM Flascher and I use this Rigup Software ... --- End quote --- How big is the dump file and how long you dumped it? My dumpfile had a size of roundabout 65MB. The first command was: "./rigup scan mso1074z-s_RAM.bin > mso1074s.txt" After that I generated the keys with these commands: "./rigup license mso1074s.txt 0x1C001" "./rigup license mso1074s.txt 0x1C002" "./rigup license mso1074s.txt 0x1C004" "./rigup license mso1074s.txt 0x1C008" "./rigup license mso1074s.txt 0x1C080" After that I entered the licenses. HTH! Cheers hammy List of hex values: (CSAR = 0x1C001) Triggers (CSAB = 0x1C002) Decoders (CSA3 = 0x1C004) Mem-depth (CSAJ = 0x1C008) Recorder (CSAS = 0x1C010) DG (CSRA = 0x1C020) 500uV (CSBA = 0x1C040) Power Ana. (CS3A = 0x1C080) Bandwidth (100MHz) (CSHY = 0x1C0FF) All |
| DaBone_206:
--- Quote from: hammy on April 29, 2016, 03:35:46 pm --- How big is the dump file and how long you dumped it? My dumpfile had a size of roundabout 65MB. --- End quote --- The dump file had a size of 65.536KB and i loaded it from 0x40000000 to 0x3FFFFFF with 4800 kHz. I have already tried the hex values 0x1C001, 0x1C002 0x1C0FF but unfortunately without success. Perhaps it may be a problem with the current firmware? |
| Prax:
--- Quote from: DaBone_206 on April 29, 2016, 09:04:53 pm --- --- Quote from: hammy on April 29, 2016, 03:35:46 pm --- How big is the dump file and how long you dumped it? My dumpfile had a size of roundabout 65MB. --- End quote --- The dump file had a size of 65.536KB and i loaded it from 0x40000000 to 0x3FFFFFF with 4800 kHz. I have already tried the hex values 0x1C001, 0x1C002 0x1C0FF but unfortunately without success. Perhaps it may be a problem with the current firmware? --- End quote --- I am having similar issues as well. Firmware 04.03 SP2 (and on SP1) Rigup 0.41 (MSO1000Z Edition) no longer seems to generate valid option keys. I continue to get "Invalid License" on the unit. On a slightly different note: In this firmware revision, it seems they moved the offset for the keys back to "02 00 84 00 10 00" Rigup 0.41 is currently looking for keys at "01 00 84 00 10 00" which is no longer the case for the MSO1074Z-S. Anyone attempting to use previously compiled rigup for windows or compile without modifying "utils.c" will likely get "Scanning 'mso1074z.bin' failed: No keys" Attemping to use rigup info mso1074z.txt [LICENSE KEY] generates a "--- FAILED ---" on verify. It does seem to know which option it is from the license key. Example (Rigup 0.41 MSO1000Z Edition): ./rigup info mso1074z.txt XXXXXXX-XXXXXXX-XXXXXXX-XXXXXXX XXXXXXX-XXXXXXX-XXXXXXX-XXXXXXX (CSA3 = 0x1C004) Signature 1: 000000008599XXXX Signature 2: 00000000877dXXXX Padding 1: 0000000000000000 Padding 2: 0000000000000000 Verify: --- FAILED --- |
| Prax:
--- Quote from: hammy on April 29, 2016, 03:35:46 pm --- --- Quote from: DaBone_206 on April 29, 2016, 12:49:56 pm ---I run the Load Dump with an SEGGER ARM Flascher and I use this Rigup Software ... --- End quote --- How big is the dump file and how long you dumped it? My dumpfile had a size of roundabout 65MB. The first command was: "./rigup scan mso1074z-s_RAM.bin > mso1074s.txt" After that I generated the keys with these commands: "./rigup license mso1074s.txt 0x1C001" "./rigup license mso1074s.txt 0x1C002" "./rigup license mso1074s.txt 0x1C004" "./rigup license mso1074s.txt 0x1C008" "./rigup license mso1074s.txt 0x1C080" After that I entered the licenses. HTH! Cheers hammy List of hex values: (CSAR = 0x1C001) Triggers (CSAB = 0x1C002) Decoders (CSA3 = 0x1C004) Mem-depth (CSAJ = 0x1C008) Recorder (CSAS = 0x1C010) DG (CSRA = 0x1C020) 500uV (CSBA = 0x1C040) Power Ana. (CS3A = 0x1C080) Bandwidth (100MHz) (CSHY = 0x1C0FF) All --- End quote --- What is your firmware version? A few of us are not getting any success on the new firmware. Unfortunately, my unit was new and had 04.03 from factory. If you didn't modify utils.c on rigup 0.41 to change offset, I surmise that it is below that. |
| Navigation |
| Message Index |
| Next page |
| Previous page |