| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (833/899) > >> |
| psysc0rpi0n:
--- Quote from: McBryce on September 19, 2016, 11:20:37 am ---The cheapest I've found that works are these Chinese J-Link knock-offs: http://www.ebay.de/itm/ARM7-ARM9-ARM11-J-link-V8-ARM-Emulator-Cortex-M3-ADS-IAR-STM32-JTAG-Interface-/272345346913 Work fine, just remember to click "no" if the J-Link software offers to upgrade the firmware. McBryce. --- End quote --- Well, that is an affordable one indeed!!! If I find no one else, I'll purchase that one! |
| McBryce:
Yup (I assume you meant to quote my post?). I've been using it quite a bit since I bought it about 2 years ago and it's never given problems yet. McBryce. |
| psysc0rpi0n:
--- Quote from: McBryce on September 19, 2016, 11:28:43 am ---Yup (I assume you meant to quote my post?). I've been using it quite a bit since I bought it about 2 years ago and it's never given problems yet. McBryce. --- End quote --- Yes I meant to quote your post! :p That's good news... And is there any way of knowing how much time these devices takes to perform the memory dump? |
| McBryce:
It's been a while since I dumped the memory from my MSO1104Z-S, but I think it took about 6 minutes. I used the "Speed 6000" command first of course, otherwise it uses some snail-paced default that takes forever. Here's a post where someone else used exactly the same method, with full instructions on what to do: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg599846/#msg599846 McBryce. |
| psysc0rpi0n:
--- Quote from: McBryce on September 19, 2016, 11:38:13 am ---It's been a while since I dumped the memory from my MSO1104Z-S, but I think it took about 6 minutes. I used the "Speed 6000" command first of course, otherwise it uses some snail-paced default that takes forever. Here's a post where someone else used exactly the same method, with full instructions on what to do: https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg599846/#msg599846 McBryce. --- End quote --- Nice... I'm going to order one of those and when I get it, I'll ask for help here if I need! Also need to save these links that will be of great help when I'm about to perform the memory dump! |
| Navigation |
| Message Index |
| Next page |
| Previous page |