| Products > Test Equipment |
| Sniffing the Rigol's internal I2C bus |
| << < (847/899) > >> |
| Edinson:
Hi, I am struggling to get the memory dump of my DS1074Z Plus. I am using an Olimex ARM-USB-OCD-H Adapter with OpenOCD in a Win7 32bit VM. I am not able to halt the CPU as I get the following error message. Has anyone an idea how to solve it. Thanks in Advance Edi --- Code: ---C:\>c:\Rigol\openocd-0.9.0\bin\openocd.exe -f c:\Rigol\Olimex.cfg Open On-Chip Debugger 0.8.0 (2014-04-28-08:39) Licensed under GNU GPL v2 For bug reports, read http://openocd.sourceforge.net/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_de assert_srst adapter_nsrst_delay: 100 jtag_ntrst_delay: 100 dcc downloads are enabled adapter speed: 6000 kHz Info : clock speed 6000 kHz Info : JTAG tap: imx28.cpu tap/device found: 0x079264f3 (mfg: 0x279, part: 0x792 6, ver: 0x0) Info : Embedded ICE version 15 Error: unknown EmbeddedICE version (comms ctrl: 0xfffffffe) Info : imx28.cpu: hardware has 2 breakpoint/watchpoint units Info : accepting 'telnet' connection from 4444 Info : Halt timed out, wake up GDB. Error: timed out while waiting for target halted in procedure 'halt' --- End code --- The Olimex.cfg file is --- Code: ---source [find interface/ftdi/olimex-arm-usb-ocd-h.cfg] source [find target/imx28.cfg] adapter_khz 6000 --- End code --- |
| Strada916:
Edinson. Pretty sure you don't need to do a memory dump on ds1074 just use the generator. Sent from my SM-G925I using Tapatalk |
| Edinson:
It's the Plus-Version with MSO-Option, so I guess I need to do the memory dump. I tried the kexgen before, it didn't work. |
| Strada916:
Ok soz Sent from my SM-G925I using Tapatalk |
| Edinson:
I tried with OCD 0.8 and 0.9 and different config files for the adapter (exchanging) the configs of OCD0.8 and 0.9 as well. Driver were installed using Zadig. Nothing worked. :( |
| Navigation |
| Message Index |
| Next page |
| Previous page |