Products > Test Equipment

Sniffing the Rigol's internal I2C bus

<< < (847/899) > >>

Edinson:
Hi,
I am struggling to get the memory dump of my DS1074Z Plus.
I am using an Olimex ARM-USB-OCD-H Adapter with OpenOCD in a Win7 32bit VM. I am not able to halt the CPU as I get the following error message. Has anyone an idea how to solve it.

Thanks in Advance
Edi



--- Code: ---C:\>c:\Rigol\openocd-0.9.0\bin\openocd.exe -f c:\Rigol\Olimex.cfg
Open On-Chip Debugger 0.8.0 (2014-04-28-08:39)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_de
assert_srst
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
dcc downloads are enabled
adapter speed: 6000 kHz
Info : clock speed 6000 kHz
Info : JTAG tap: imx28.cpu tap/device found: 0x079264f3 (mfg: 0x279, part: 0x792
6, ver: 0x0)
Info : Embedded ICE version 15
Error: unknown EmbeddedICE version (comms ctrl: 0xfffffffe)
Info : imx28.cpu: hardware has 2 breakpoint/watchpoint units
Info : accepting 'telnet' connection from 4444
Info : Halt timed out, wake up GDB.
Error: timed out while waiting for target halted
in procedure 'halt'

--- End code ---

The Olimex.cfg file is

--- Code: ---source [find interface/ftdi/olimex-arm-usb-ocd-h.cfg]
source [find target/imx28.cfg]
adapter_khz 6000

--- End code ---


Strada916:
Edinson. Pretty sure you don't need to do a memory dump on ds1074 just use the generator.

Sent from my SM-G925I using Tapatalk

Edinson:
It's the Plus-Version with MSO-Option, so I guess I need to do the memory dump.
I tried the kexgen before, it didn't work.

Strada916:
Ok soz

Sent from my SM-G925I using Tapatalk

Edinson:
I tried with OCD 0.8 and 0.9 and different config files for the adapter (exchanging) the configs of OCD0.8 and 0.9 as well. Driver were installed using Zadig. Nothing worked.  :(

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod