Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (855/899) > >>
RebornGeek:
Thanks for the great posts. 

I've used a couple of the license-key-generator sites (http://gotroot.ca/rigol/riglol/) and used the key on my 1074S Scope.  Keep getting invalid license.

So:

1. Does this hack still work?  Seems that maybe Rigol has caught on.
2. Should the license key change?  I keep getting the same key trying different website, clearing my cache, etc.

Many thanks for any help.
RebornGeek
manu:

--- Quote from: RebornGeek on November 14, 2016, 09:42:37 pm ---Thanks for the great posts. 

I've used a couple of the license-key-generator sites (http://gotroot.ca/rigol/riglol/) and used the key on my 1074S Scope.  Keep getting invalid license.

So:

1. Does this hack still work?  Seems that maybe Rigol has caught on.

--- End quote ---

I tried with a ds1054z this week-end to activate:
- advanced triggers: DSAB
- decoders: DSAC
- 24M memory: DSAE
- recorder: DSAJ
Use your scope serial number to generate the license key(s).
cypcyp:
Hello, i received my DS1074-S-Z a few days ago with the free DECODER-Option. The official application of that option via Rigol website went fine. But unfortunately the keys generated by riglol_1.03d for the advanced trigger failed, now i'm locked out for the 12 hrs period every time i enter a wrong key.

Do you have any idea why the keygen doesn't work? Sysinfo says DS1074Z Plus Firmware 00.04.03.SP2 Board Version 6.1.1.
Were other attempts successful on that model? Or am i too stupid to understand the procedure?
I enter my serial Nr, the Option-select DSAB, the private key is generated by the keygen and then dial in the 4*7 char key.

 
Daruosha:

--- Quote from: cypcyp on November 17, 2016, 06:02:04 pm ---Hello, i received my DS1074-S-Z a few days ago with the free DECODER-Option. The official application of that option via Rigol website went fine. But unfortunately the keys generated by riglol_1.03d for the advanced trigger failed, now i'm locked out for the 12 hrs period every time i enter a wrong key.

Do you have any idea why the keygen doesn't work? Sysinfo says DS1074Z Plus Firmware 00.04.03.SP2 Board Version 6.1.1.
Were other attempts successful on that model? Or am i too stupid to understand the procedure?
I enter my serial Nr, the Option-select DSAB, the private key is generated by the keygen and then dial in the 4*7 char key.

--- End quote ---

Have you tried to generate the keys on a different browser or even a different machine?
MarkF:

--- Quote from: Daruosha on November 09, 2016, 02:28:15 am ---Let's assume I have the codes for 2000 minutes trial license keys. Can I uninstall them when it's close to expiration and re-install them (with SCPI commands of course)?
Is there anyway to completely factory reset the scope?

--- End quote ---

Maybe someone else can verify this. But, there are NO codes for the trial licenses.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod