Products > Test Equipment

Sniffing the Rigol's internal I2C bus

<< < (855/899) > >>

RebornGeek:
Thanks for the great posts. 

I've used a couple of the license-key-generator sites (http://gotroot.ca/rigol/riglol/) and used the key on my 1074S Scope.  Keep getting invalid license.

So:

1. Does this hack still work?  Seems that maybe Rigol has caught on.
2. Should the license key change?  I keep getting the same key trying different website, clearing my cache, etc.

Many thanks for any help.
RebornGeek

manu:

--- Quote from: RebornGeek on November 14, 2016, 09:42:37 pm ---Thanks for the great posts. 

I've used a couple of the license-key-generator sites (http://gotroot.ca/rigol/riglol/) and used the key on my 1074S Scope.  Keep getting invalid license.

So:

1. Does this hack still work?  Seems that maybe Rigol has caught on.

--- End quote ---

I tried with a ds1054z this week-end to activate:
- advanced triggers: DSAB
- decoders: DSAC
- 24M memory: DSAE
- recorder: DSAJ
Use your scope serial number to generate the license key(s).

cypcyp:
Hello, i received my DS1074-S-Z a few days ago with the free DECODER-Option. The official application of that option via Rigol website went fine. But unfortunately the keys generated by riglol_1.03d for the advanced trigger failed, now i'm locked out for the 12 hrs period every time i enter a wrong key.

Do you have any idea why the keygen doesn't work? Sysinfo says DS1074Z Plus Firmware 00.04.03.SP2 Board Version 6.1.1.
Were other attempts successful on that model? Or am i too stupid to understand the procedure?
I enter my serial Nr, the Option-select DSAB, the private key is generated by the keygen and then dial in the 4*7 char key.

 

Daruosha:

--- Quote from: cypcyp on November 17, 2016, 06:02:04 pm ---Hello, i received my DS1074-S-Z a few days ago with the free DECODER-Option. The official application of that option via Rigol website went fine. But unfortunately the keys generated by riglol_1.03d for the advanced trigger failed, now i'm locked out for the 12 hrs period every time i enter a wrong key.

Do you have any idea why the keygen doesn't work? Sysinfo says DS1074Z Plus Firmware 00.04.03.SP2 Board Version 6.1.1.
Were other attempts successful on that model? Or am i too stupid to understand the procedure?
I enter my serial Nr, the Option-select DSAB, the private key is generated by the keygen and then dial in the 4*7 char key.

--- End quote ---

Have you tried to generate the keys on a different browser or even a different machine?

MarkF:

--- Quote from: Daruosha on November 09, 2016, 02:28:15 am ---Let's assume I have the codes for 2000 minutes trial license keys. Can I uninstall them when it's close to expiration and re-install them (with SCPI commands of course)?
Is there anyway to completely factory reset the scope?

--- End quote ---

Maybe someone else can verify this. But, there are NO codes for the trial licenses.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod