Products > Test Equipment
Sniffing the Rigol's internal I2C bus
Noize:
Quote from: jlm1 on January 01, 2017, 07:37:30 PM>Quote
Update: Another member generated keys with his complied code and everything worked. So I was doing something wrong or my compiled rigup didn't work. so Yes, rigup still works for Software 4.03.SP2, Board 6.1.4, without JTAG header.Quote
It was actually loaderr's version from Reply #4308 compiled with VS2013 Just to clarify.
The file I have attached was compiled on a windows 7 machine.
Use Rigol instead of rigup for the commands.
--- End quote ---
--- End quote ---
ve7xen:
--- Quote from: loaderr on November 28, 2016, 11:57:55 pm ---Hi all,
I uploaded fixed rigup sources to https://www.dropbox.com/sh/1yrh8s90ityn90s/AAA6PXlJk9gGQwoDOwO6TDQua?dl=0, feel free to use.
There are still some bugs as psysc0rpi0n was unable to unlock so far so use cautiously :)
I did some investigation how licenses are stored and it looks like they just programmed to flash and never erased. On startup FW scans all of them to decide which one to use. As longs as rigup works no need to worry about trials.
--- End quote ---
Great work, thanks!
I have ported the build back to original POSIX build environment (just copied the new source into the old build directory), added some attribution for your work and bumped the version to 0.4.2, and packaged it up as rigup-0.4.2 and built a Linux x86_64 binary here.
I also decided to get MingW and try building for Windows. Seems to build with some warnings, but bails without outputting anything on the console. Not sure what that's about. I might spend a few minutes debugging, but it's not a platform I care about ;).
Edit: Build problem was -Wl,-dead_strip. Removing this linker option builds working Windows binaries. All builds now:
Linux x64 i686
Windows x64 i686
mikehs:
--- Quote from: janekivi on November 28, 2016, 04:59:56 pm ---SYSTem: OPTion:UNINSTall is deleting "All official options removed" or something like this.
But after some mem dumps I found 36 Hours Trial License Key ... key. Like for DP832
there is the same for DS1054Z too in here http://www.gotroot.ca/rigol/riglol/
And this is V for generating trial keys for DS1054Z
Option VSER is all options like DSER but 36 hours trial version.
So others can be
DS1000z device options:
first character: D = official, V = trial
DSAB - Advanced Triggers
DSAC - Decoders
DSAE - 24M Memory
DSAJ - Recorder
DSBA - 500uV Vertical
DSEA - 100MHz
DSFR - all options
DSER - all options - 500uV Vertical
Currently I have DS1000Z-00.04.04.00.07 firmware.
Now if I add official license, all options are official and after delete
all options continue trial time. (and mem dump is messier at key regions
like he is generating all separate trial keys but factory ones are there too. )
--- End quote ---
Sorry if this should have been clear after reading the last 10 pages...
I am just trying to understand if the www.gotroot.ca/rigol/riglol generated key still works for the newer DS1054Z?
software version: 00:04:04
board version: 0.1.4
I tried it, but no love.
Thanks for any help!
mikehs:
--- Quote from: mikehs on January 26, 2017, 04:36:03 am ---
--- Quote from: janekivi on November 28, 2016, 04:59:56 pm ---SYSTem: OPTion:UNINSTall is deleting "All official options removed" or something like this.
But after some mem dumps I found 36 Hours Trial License Key ... key. Like for DP832
there is the same for DS1054Z too in here http://www.gotroot.ca/rigol/riglol/
And this is V for generating trial keys for DS1054Z
Option VSER is all options like DSER but 36 hours trial version.
So others can be
DS1000z device options:
first character: D = official, V = trial
DSAB - Advanced Triggers
DSAC - Decoders
DSAE - 24M Memory
DSAJ - Recorder
DSBA - 500uV Vertical
DSEA - 100MHz
DSFR - all options
DSER - all options - 500uV Vertical
Currently I have DS1000Z-00.04.04.00.07 firmware.
Now if I add official license, all options are official and after delete
all options continue trial time. (and mem dump is messier at key regions
like he is generating all separate trial keys but factory ones are there too. )
--- End quote ---
Sorry if this should have been clear after reading the last 10 pages...
I am just trying to understand if the www.gotroot.ca/rigol/riglol generated key still works for the newer DS1054Z?
software version: 00:04:04
board version: 0.1.4
I tried it, but no love.
Thanks for any help!
--- End quote ---
Sorry for bothering you all with that newbee Q. I got it working!
Turns out that you need to delete all the characters in the SN entry dialog before entering your SN. I deleted up to the 'D' and that apparently does not work.
FT952:
I bought a MSO2072A.
Software version 00.03.04.SP2
Hardware version 2.2
I read eevblog from 'Reply #3668' and tried 'Rigol USB' as well as 'Peter Dreisiebner.at - Rigol Bildschirmkopie'.
I dumped 13MB, 32MB and even 64MB (with Bildschirmkopie).
When I try to find the keys with rigup, I always get the message 'No keys'. :-\
Even in the following replies I didn't find any solution.
I think I somewhere saw that MSO2072A would need a differnt kind of unlocking.
Any suggestions ?
Thanks
R.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version