Products > Test Equipment
Sniffing the Rigol's internal I2C bus
<< < (879/899) > >>
edgelog:

--- Quote from: gantarone on January 05, 2018, 10:28:21 am ---Thanks edgelog!!!
it works!!!

--- End quote ---

Glad I could help!
metalmanbaris:

I know it has bees asked million times... I read all posts but I didn't find my answer ...

I have a DS1104Z Plus.. Version 04.04 SP3
I did the memory dump.. I scanned the keys..
But when I use the rigup and use the keys on the scope I got "invalid license key" error.

I used 0.4.1 and 0.4.2 of rigup   (Hacked up for MSO1000Z(-S) rmd79, 0ff eevblog.com)

What am I doing wrong...? Isn't the DS1104Z Plus hackable.... Should I use a different rigup tool ?

Thanks
Baris (TA7W)



 
edgelog:

--- Quote from: metalmanbaris on March 19, 2018, 07:42:39 pm ---
I have a DS1104Z Plus.. Version 04.04 SP3
I did the memory dump.. I scanned the keys..
But when I use the rigup and use the keys on the scope I got "invalid license key" error.

I used 0.4.1 and 0.4.2 of rigup   (Hacked up for MSO1000Z(-S) rmd79, 0ff eevblog.com)

What am I doing wrong...? Isn't the DS1104Z Plus hackable.... Should I use a different rigup tool ?

--- End quote ---

The MSO1000 and the DS1000 are not exactly the same. The rigup you should use is not the MSO one, but the DS one. There's a small difference in the string it's looking for in the memory dump. OTOH, if you used the wrong rigup, I would have expected it not to find any keys, and that's not your case, it seems.
edgelog:

--- Quote from: metalmanbaris on March 19, 2018, 07:42:39 pm ---I have a DS1104Z Plus.. Version 04.04 SP3
I did the memory dump.. I scanned the keys..
But when I use the rigup and use the keys on the scope I got "invalid license key" error.

--- End quote ---

I also seem to have a vague memory of others with that problem if they cut/pasted the codes into the scope using the terminal interface. Some hidden characters got copied along. Have you tried entering the codes by hand through the scope's own interface?
metalmanbaris:

--- Quote from: edgelog on March 19, 2018, 08:49:04 pm ---Have you tried entering the codes by hand through the scope's own interface?

--- End quote ---

Yes I did...same error.. "invalidlicense"

Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod