No doubt, this thread is now standing among legendary discussion threads at this forum, huge props to all contributors.
PS : I guess its time to refresh the "offline" version again.
Amazing stuff by you guys!
Many thanks for this help.
It isn't running with XP(32bit). Just I run it, it opens and close immediately!
Any feedback from other member on Win platform?
I have created a Windows executable with MinGW.
Worked perfectly - my DP832 is now all 'Official'
Brilliant, well done
You had right, with MS-DOS, everything is OK!
Many thanks to all of you
My dp832 timebomb edition have firmware bellow:
00.01.03
s/n: DP8C1512002xx
Can i update with this old firmware ?
or is better update to 00.01.06 ?
Thanks
I've got that same "timebomb" edition, haha. What are the differences between firmware 1.03, and 1.06?
Mine came with 1.04. Where did you get the newer versions?
http://www.rigolna.com/products/dc-power-supplies/dp800/dp832/For update the dp832 need send a request form to rigol.
Or pay for increase more licenses.
DP832 License Activation InstructionsThe DP832 Power Supply has a number of upgrades that can be purchased optionally. This document covers how to activate the licenses.
My dp832 timebomb edition have firmware bellow:
00.01.03
s/n: DP8C1512002xx
Can i update with this old firmware ?
or is better update to 00.01.06 ?
Thanks
Where did you see this "00.01.06" firmware version for DP832 series?
The DP832 is not currently listed on Rigol's "Latest firmware page" (see below) and I haven't seen anyone mention Rigol releasing a firmware update for the DP832 yet.
Edit:
Nevermind, now I see it mentioned
here.
Hopefully Rigol will make this updated firmware available!
Here are the latest Firmware versions by Rigol product family as of July 31, 2013:
DS2000 FW-Version: 00.01.01
DS4000 FW-Version: 00.02.00
DS6000 FW-Version: 00.01.04
DSA815 FW-Version: 00.01.07
DSA1000 FW-Version: 00.01.16
DG4000 FW-Version: 00.01.06
DG5000 FW-Version: 01.01.08
virtual hugs to all contributors
The password for the DP832 "ManualCal" menu is "2012".
dp832 unlocked.
Thanks Cybernet, Studio25 and all peoples that participated.
Update for DS1000z support.
Now we have:
- DS1000z
- DS2000
- DS4000
- DSA815
- DP832
http://pastebin.com/ifTEf2pq
Great work studio25!
I like how you provided info for all the supported models. However, the information on the DS4000 series could be improved. See post 713 on page 48 of this thread.
Does the DS4000 support SW BW upgrades? Last I read it was options for decode and such.
WOW! Thanks to all that contributed, especially Cybernet and Studio25 of course! The DOS version works like a charm on my DS1104Z!
Does the DS4000 support SW BW upgrades? Last I read it was options for decode and such.
One forum member had his DS4000 magically"revert" to a 500MHz model after some fast power on/off cycle or something (lost the serial number as well IIRC) so it looks like the bandwidth option is indeed in lurking in there somewhere.
To my knowlege the current keygen does not provide means to unlock it though. I'm keeping my fingers crossed that the brilliant people giving us thís will figure out the BW limit of the DS4000 series as well.
Thanks again by the way!
dp832 unlocked.
Thanks Cybernet, Studio25 and all peoples that participated.
Does unlocking the DP832 enable the multicolor and more intuitive GUI that the 832A has? I think Dave mentioned in his video that the TFT hardware is the same.
Does unlocking the DP832 enable the multicolor and more intuitive GUI that the 832A has? I think Dave mentioned in his video that the TFT hardware is the same.
Short answer: NO. This and many similar questions have already been answered in
this thread.
As for "more intuitive GUI that the 832A has" -- that is seriously a matter of personal opinion! I think the 832 is more intuitive with the vertical panels, which match the sequence of Ch1, Ch2, Ch3 on/off buttons.