Author Topic: External Clock Input board for HP/Agilent 332xx series  (Read 196 times)

0 Members and 1 Guest are viewing this topic.

Offline vasa1958

  • Newbie
  • Posts: 1
  • Country: ch
External Clock Input board for HP/Agilent 332xx series
« on: May 23, 2019, 09:22:32 pm »
Hi fellows,

Some years ago I made a external clock input board for my HP/Agilent 33220A.

I offer two remaining PCB’s few weeks ago on HP-Agilent-Keysight-equipment groups.io and they immediately gone.

My question is, whether there is any more interest in this or to archive this project?

On my side, to make it cost effective, more than 7 orders are required. The price would be 99USD including the shipping cost to US or Europe and will take about 4-5 weeks to build-up (holiday season coming…).

Design are based on original Agilent 33220-80001 (33220-66503) board and compatible with 332xx series of function / arbitrary waveform generators, but slightly modified.
Input impedance is 50ohm AC coupled, DC isolated from instrument housing and sensitivity of -13 +/-2 dBm. Input level for optimal jitter/phase noise is between 0 and 20dBm. Board is only 10MHz input, no loop back output!

Picture of board installed in my 33220a is attached. New revision will have MCL or Coilcraft 1:1 input isolation transformer.
To save group bandwidth, please mail to vasa1958@gmail.com

Regards,
Milan
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf