Author Topic: Software setup/Mainboard change for Agilent 16900A/16902A/16903A logic analyzer  (Read 29186 times)

0 Members and 1 Guest are viewing this topic.

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs
Oh, no wonder I don't know what the walk command is... it it YOURS .  I saw the walk.zip attached, but I didn't download it before, I thought it was an example of the output.

OK, I put the original hard drive back with Windows XP.  Here is the output of the walk:

Code: [Select]
+ DeviceID:
| HTREE\ROOT\0
| + DeviceID:
| | ROOT\*UPDDPNP\0000
| | HardwareIDs:
| | ->*UPDDPNP
| | Device Description:
| | ->Universal Pointer Device Driver
| | Driver:
| | ->{4D36E96F-E325-11CE-BFC1-08002BE10318}\0002
| | Service:
| | ->tbupdd
| | Capabilities: SURPRISEREMOVALOK
| + DeviceID:
| | ROOT\ACPI_HAL\0000
| | HardwareIDs:
| | ->acpiapic_up
| | CompatibleIDs:
| | ->DETECTEDInternal\ACPI_HAL
| | ->DETECTED\ACPI_HAL
| | Device Description:
| | ->ACPI Uniprocessor PC
| | Driver:
| | ->{4D36E966-E325-11CE-BFC1-08002BE10318}\0000
| | Service:
| | ->\Driver\ACPI_HAL
| | + DeviceID:
| | | ACPI_HAL\PNP0C08\0
| | | HardwareIDs:
| | | ->ACPI_HAL\PNP0C08
| | | ->*PNP0C08
| | | Device Description:
| | | ->Microsoft ACPI-Compliant System
| | | Driver:
| | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0005
| | | Service:
| | | ->ACPI
| | | Capabilities: UNIQUEID SILENTINSTALL
| | | + DeviceID:
| | | | ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_6\_0
| | | | HardwareIDs:
| | | | ->ACPI\GenuineIntel_-_x86_Family_15_Model_6
| | | | ->*GenuineIntel_-_x86_Family_15_Model_6
| | | | ->ACPI\GenuineIntel_-_x86_Family_15
| | | | ->*GenuineIntel_-_x86_Family_15
| | | | ->ACPI\GenuineIntel_-_x86
| | | | ->*GenuineIntel_-_x86
| | | | CompatibleIDs:
| | | | ->ACPI\Processor
| | | | Device Description:
| | | | ->Intel Processor
| | | | Friendly Name:
| | | | ->Intel(R) Celeron(R) D CPU 3.20GHz
| | | | Driver:
| | | | ->{50127DC3-0F36-415E-A6CC-4CB3BE910B65}\0001
| | | | Service:
| | | | ->intelppm
| | | | Capabilities: UNIQUEID SILENTINSTALL
| | | + DeviceID:
| | | | ACPI\PNP0C0C\2&DABA3FF&0
| | | | HardwareIDs:
| | | | ->ACPI\PNP0C0C
| | | | ->*PNP0C0C
| | | | Device Description:
| | | | ->ACPI Power Button
| | | | Driver:
| | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0011
| | | | Capabilities: SILENTINSTALL RAWDEVICEOK
| | | + DeviceID:
| | | | ACPI\PNP0A08\1
| | | | HardwareIDs:
| | | | ->ACPI\PNP0A08
| | | | ->*PNP0A08
| | | | CompatibleIDs:
| | | | ->*PNP0A03
| | | | Device Description:
| | | | ->PCI bus
| | | | Driver:
| | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0008
| | | | Service:
| | | | ->pci
| | | | Capabilities: UNIQUEID SILENTINSTALL
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_02\3&2411E6FE&0&00
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_2770&SUBSYS_00000000&REV_02
| | | | | ->PCI\VEN_8086&DEV_2770&SUBSYS_00000000
| | | | | ->PCI\VEN_8086&DEV_2770&REV_02
| | | | | ->PCI\VEN_8086&DEV_2770
| | | | | ->PCI\VEN_8086&DEV_2770&CC_060000
| | | | | ->PCI\VEN_8086&DEV_2770&CC_0600
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&CC_060000
| | | | | ->PCI\VEN_8086&CC_0600
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_060000
| | | | | ->PCI\CC_0600
| | | | | Location Information
| | | | | ->PCI bus 0, device 0, function 0
| | | | | Device Description:
| | | | | ->Intel(R) 945G/GZ/P/PL Processor to I/O Controller - 2770
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0015
| | | | | Capabilities: RAWDEVICEOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_2772&SUBSYS_27728086&REV_02\3&2411E6FE&0&10
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_2772&SUBSYS_27728086&REV_02
| | | | | ->PCI\VEN_8086&DEV_2772&SUBSYS_27728086
| | | | | ->PCI\VEN_8086&DEV_2772&CC_030000
| | | | | ->PCI\VEN_8086&DEV_2772&CC_0300
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_2772&REV_02
| | | | | ->PCI\VEN_8086&DEV_2772
| | | | | ->PCI\VEN_8086&CC_030000
| | | | | ->PCI\VEN_8086&CC_0300
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_030000
| | | | | ->PCI\CC_0300
| | | | | Location Information
| | | | | ->PCI bus 0, device 2, function 0
| | | | | Device Description:
| | | | | ->Intel(R) 82945G Express Chipset Family
| | | | | Driver:
| | | | | ->{4D36E968-E325-11CE-BFC1-08002BE10318}\0000
| | | | | Service:
| | | | | ->ialm
| | | | | + DeviceID:
| | | | | | DISPLAY\MIT20D3\4&2DEA7F16&0&80861500&00&02
| | | | | | HardwareIDs:
| | | | | | ->Monitor\MIT20D3
| | | | | | CompatibleIDs:
| | | | | | ->*PNP09FF
| | | | | | Device Description:
| | | | | | ->Plug and Play Monitor
| | | | | | Driver:
| | | | | | ->{4D36E96E-E325-11CE-BFC1-08002BE10318}\0004
| | | | | | Capabilities: EJECTSUPPORTED REMOVABLE SILENTINSTALL RAWDEVICEOK SURPRISEREMOVALOK
| | | | | + DeviceID:
| | | | | | DISPLAY\MIT20D3\4&2DEA7F16&0&80861400&00&02
| | | | | | HardwareIDs:
| | | | | | ->Monitor\MIT20D3
| | | | | | CompatibleIDs:
| | | | | | ->*PNP09FF
| | | | | | Device Description:
| | | | | | ->Plug and Play Monitor
| | | | | | Driver:
| | | | | | ->{4D36E96E-E325-11CE-BFC1-08002BE10318}\0001
| | | | | | Capabilities: EJECTSUPPORTED REMOVABLE SILENTINSTALL RAWDEVICEOK SURPRISEREMOVALOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_2776&SUBSYS_27728086&REV_02\3&2411E6FE&0&11
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_2776&SUBSYS_27728086&REV_02
| | | | | ->PCI\VEN_8086&DEV_2776&SUBSYS_27728086
| | | | | ->PCI\VEN_8086&DEV_2776&CC_038000
| | | | | ->PCI\VEN_8086&DEV_2776&CC_0380
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_2776&REV_02
| | | | | ->PCI\VEN_8086&DEV_2776
| | | | | ->PCI\VEN_8086&CC_038000
| | | | | ->PCI\VEN_8086&CC_0380
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_038000
| | | | | ->PCI\CC_0380
| | | | | Location Information
| | | | | ->PCI bus 0, device 2, function 1
| | | | | Device Description:
| | | | | ->Intel(R) 82945G Express Chipset Family
| | | | | Driver:
| | | | | ->{4D36E968-E325-11CE-BFC1-08002BE10318}\0001
| | | | | Service:
| | | | | ->ialm
| | | | | + DeviceID:
| | | | | | DISPLAY\MIT20D3\4&1A255B0C&0&80871400&00&22
| | | | | | HardwareIDs:
| | | | | | ->Monitor\MIT20D3
| | | | | | CompatibleIDs:
| | | | | | ->*PNP09FF
| | | | | | Device Description:
| | | | | | ->Plug and Play Monitor
| | | | | | Driver:
| | | | | | ->{4D36E96E-E325-11CE-BFC1-08002BE10318}\0003
| | | | | | Capabilities: EJECTSUPPORTED REMOVABLE SILENTINSTALL RAWDEVICEOK SURPRISEREMOVALOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27D8&SUBSYS_27D88086&REV_01\3&2411E6FE&0&D8
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27D8&SUBSYS_27D88086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27D8&SUBSYS_27D88086
| | | | | ->PCI\VEN_8086&DEV_27D8&CC_040300
| | | | | ->PCI\VEN_8086&DEV_27D8&CC_0403
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27D8&REV_01
| | | | | ->PCI\VEN_8086&DEV_27D8
| | | | | ->PCI\VEN_8086&CC_040300
| | | | | ->PCI\VEN_8086&CC_0403
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_040300
| | | | | ->PCI\CC_0403
| | | | | Location Information
| | | | | ->PCI bus 0, device 27, function 0
| | | | | Device Description:
| | | | | ->Microsoft UAA Bus Driver for High Definition Audio
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0033
| | | | | Service:
| | | | | ->HDAudBus
| | | | | + DeviceID:
| | | | | | HDAUDIO\FUNC_01&VEN_10EC&DEV_0883&SUBSYS_144A0000&REV_1000\4&3108D61F&0&0001
| | | | | | HardwareIDs:
| | | | | | ->HDAUDIO\FUNC_01&VEN_10EC&DEV_0883&SUBSYS_144A0000&REV_1000
| | | | | | ->HDAUDIO\FUNC_01&VEN_10EC&DEV_0883&SUBSYS_144A0000
| | | | | | CompatibleIDs:
| | | | | | ->HDAUDIO\FUNC_01&VEN_10EC&DEV_0883&REV_1000
| | | | | | ->HDAUDIO\FUNC_01&VEN_10EC&DEV_0883
| | | | | | ->HDAUDIO\FUNC_01&VEN_10EC
| | | | | | ->HDAUDIO\FUNC_01
| | | | | | Location Information
| | | | | | ->Internal High Definition Audio Bus
| | | | | | Device Description:
| | | | | | ->Realtek High Definition Audio
| | | | | | Driver:
| | | | | | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0017
| | | | | | Service:
| | | | | | ->IntcAzAudAddService
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01\3&2411E6FE&0&E0
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27D0&SUBSYS_00000000&REV_01
| | | | | ->PCI\VEN_8086&DEV_27D0&SUBSYS_00000000
| | | | | ->PCI\VEN_8086&DEV_27D0&REV_01
| | | | | ->PCI\VEN_8086&DEV_27D0
| | | | | ->PCI\VEN_8086&DEV_27D0&CC_060400
| | | | | ->PCI\VEN_8086&DEV_27D0&CC_0604
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&CC_060400
| | | | | ->PCI\VEN_8086&CC_0604
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_060400
| | | | | ->PCI\CC_0604
| | | | | Location Information
| | | | | ->PCI bus 0, device 28, function 0
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0013
| | | | | Service:
| | | | | ->pci
| | | | | + DeviceID:
| | | | | | PCI\VEN_8086&DEV_108C&SUBSYS_00008086&REV_03\4&1B41B794&0&00E0
| | | | | | HardwareIDs:
| | | | | | ->PCI\VEN_8086&DEV_108C&SUBSYS_00008086&REV_03
| | | | | | ->PCI\VEN_8086&DEV_108C&SUBSYS_00008086
| | | | | | ->PCI\VEN_8086&DEV_108C&CC_020000
| | | | | | ->PCI\VEN_8086&DEV_108C&CC_0200
| | | | | | CompatibleIDs:
| | | | | | ->PCI\VEN_8086&DEV_108C&REV_03
| | | | | | ->PCI\VEN_8086&DEV_108C
| | | | | | ->PCI\VEN_8086&CC_020000
| | | | | | ->PCI\VEN_8086&CC_0200
| | | | | | ->PCI\VEN_8086
| | | | | | ->PCI\CC_020000
| | | | | | ->PCI\CC_0200
| | | | | | Location Information
| | | | | | ->PCI bus 1, device 0, function 0
| | | | | | Device Description:
| | | | | | ->Intel(R) PRO/1000 PM Network Connection
| | | | | | Driver:
| | | | | | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0008
| | | | | | Service:
| | | | | | ->e1express
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27C8&SUBSYS_27C88086&REV_01\3&2411E6FE&0&E8
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27C8&SUBSYS_27C88086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27C8&SUBSYS_27C88086
| | | | | ->PCI\VEN_8086&DEV_27C8&CC_0C0300
| | | | | ->PCI\VEN_8086&DEV_27C8&CC_0C03
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27C8&REV_01
| | | | | ->PCI\VEN_8086&DEV_27C8
| | | | | ->PCI\VEN_8086&CC_0C0300
| | | | | ->PCI\VEN_8086&CC_0C03
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_0C0300
| | | | | ->PCI\CC_0C03
| | | | | Location Information
| | | | | ->PCI bus 0, device 29, function 0
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
| | | | | Driver:
| | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0004
| | | | | Service:
| | | | | ->usbuhci
| | | | | + DeviceID:
| | | | | | USB\ROOT_HUB\4&1C12D0FB&0
| | | | | | HardwareIDs:
| | | | | | ->USB\ROOT_HUB&VID8086&PID27C8&REV0001
| | | | | | ->USB\ROOT_HUB&VID8086&PID27C8
| | | | | | ->USB\ROOT_HUB
| | | | | | Device Description:
| | | | | | ->USB Root Hub
| | | | | | Driver:
| | | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0005
| | | | | | Service:
| | | | | | ->usbhub
| | | | | | Capabilities: SURPRISEREMOVALOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27C9&SUBSYS_27C98086&REV_01\3&2411E6FE&0&E9
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27C9&SUBSYS_27C98086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27C9&SUBSYS_27C98086
| | | | | ->PCI\VEN_8086&DEV_27C9&CC_0C0300
| | | | | ->PCI\VEN_8086&DEV_27C9&CC_0C03
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27C9&REV_01
| | | | | ->PCI\VEN_8086&DEV_27C9
| | | | | ->PCI\VEN_8086&CC_0C0300
| | | | | ->PCI\VEN_8086&CC_0C03
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_0C0300
| | | | | ->PCI\CC_0C03
| | | | | Location Information
| | | | | ->PCI bus 0, device 29, function 1
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
| | | | | Driver:
| | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0003
| | | | | Service:
| | | | | ->usbuhci
| | | | | + DeviceID:
| | | | | | USB\ROOT_HUB\4&E9A8164&0
| | | | | | HardwareIDs:
| | | | | | ->USB\ROOT_HUB&VID8086&PID27C9&REV0001
| | | | | | ->USB\ROOT_HUB&VID8086&PID27C9
| | | | | | ->USB\ROOT_HUB
| | | | | | Device Description:
| | | | | | ->USB Root Hub
| | | | | | Driver:
| | | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0007
| | | | | | Service:
| | | | | | ->usbhub
| | | | | | Capabilities: SURPRISEREMOVALOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27CA&SUBSYS_27CA8086&REV_01\3&2411E6FE&0&EA
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27CA&SUBSYS_27CA8086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27CA&SUBSYS_27CA8086
| | | | | ->PCI\VEN_8086&DEV_27CA&CC_0C0300
| | | | | ->PCI\VEN_8086&DEV_27CA&CC_0C03
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27CA&REV_01
| | | | | ->PCI\VEN_8086&DEV_27CA
| | | | | ->PCI\VEN_8086&CC_0C0300
| | | | | ->PCI\VEN_8086&CC_0C03
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_0C0300
| | | | | ->PCI\CC_0C03
| | | | | Location Information
| | | | | ->PCI bus 0, device 29, function 2
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
| | | | | Driver:
| | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0002
| | | | | Service:
| | | | | ->usbuhci
| | | | | + DeviceID:
| | | | | | USB\ROOT_HUB\4&218D314D&0
| | | | | | HardwareIDs:
| | | | | | ->USB\ROOT_HUB&VID8086&PID27CA&REV0001
| | | | | | ->USB\ROOT_HUB&VID8086&PID27CA
| | | | | | ->USB\ROOT_HUB
| | | | | | Device Description:
| | | | | | ->USB Root Hub
| | | | | | Driver:
| | | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0006
| | | | | | Service:
| | | | | | ->usbhub
| | | | | | Capabilities: SURPRISEREMOVALOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27CB&SUBSYS_27CA8086&REV_01\3&2411E6FE&0&EB
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27CB&SUBSYS_27CA8086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27CB&SUBSYS_27CA8086
| | | | | ->PCI\VEN_8086&DEV_27CB&CC_0C0300
| | | | | ->PCI\VEN_8086&DEV_27CB&CC_0C03
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27CB&REV_01
| | | | | ->PCI\VEN_8086&DEV_27CB
| | | | | ->PCI\VEN_8086&CC_0C0300
| | | | | ->PCI\VEN_8086&CC_0C03
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_0C0300
| | | | | ->PCI\CC_0C03
| | | | | Location Information
| | | | | ->PCI bus 0, device 29, function 3
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
| | | | | Driver:
| | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0001
| | | | | Service:
| | | | | ->usbuhci
| | | | | + DeviceID:
| | | | | | USB\ROOT_HUB\4&C1DE8DA&0
| | | | | | HardwareIDs:
| | | | | | ->USB\ROOT_HUB&VID8086&PID27CB&REV0001
| | | | | | ->USB\ROOT_HUB&VID8086&PID27CB
| | | | | | ->USB\ROOT_HUB
| | | | | | Device Description:
| | | | | | ->USB Root Hub
| | | | | | Driver:
| | | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0009
| | | | | | Service:
| | | | | | ->usbhub
| | | | | | Capabilities: SURPRISEREMOVALOK
| | | | | | + DeviceID:
| | | | | | | USB\VID_07DD&PID_0001\5&16737FCB&0&1
| | | | | | | HardwareIDs:
| | | | | | | ->USB\Vid_07dd&Pid_0001&Rev_804=
| | | | | | | ->USB\Vid_07dd&Pid_0001
| | | | | | | CompatibleIDs:
| | | | | | | ->USB\Class_03&SubClass_01&Prot_02
| | | | | | | ->USB\Class_03&SubClass_01
| | | | | | | ->USB\Class_03
| | | | | | | Location Information
| | | | | | | ->TSHARC Octopus
| | | | | | | Device Description:
| | | | | | | ->USB HID Touch Screen Controller
| | | | | | | Driver:
| | | | | | | ->{745A17A0-74D3-11D0-B6FE-00A0C90F57DA}\0000
| | | | | | | Service:
| | | | | | | ->HidUsb
| | | | | | | Capabilities: REMOVABLE SURPRISEREMOVALOK
| | | | | | | + DeviceID:
| | | | | | | | HID\VID_07DD&PID_0001\6&35C35BB8&1&0000
| | | | | | | | HardwareIDs:
| | | | | | | | ->HID\Vid_07dd&Pid_0001&Rev_804=
| | | | | | | | ->HID\Vid_07dd&Pid_0001
| | | | | | | | ->HID_DEVICE_SYSTEM_MOUSE
| | | | | | | | ->HID_DEVICE_UP:0001_U:0002
| | | | | | | | ->HID_DEVICE
| | | | | | | | CompatibleIDs:
| | | | | | | | Device Description:
| | | | | | | | ->USB Touch Screen Controller
| | | | | | | | Driver:
| | | | | | | | ->{4D36E96F-E325-11CE-BFC1-08002BE10318}\0004
| | | | | | | | Service:
| | | | | | | | ->mouhid
| | | | | | | | Capabilities: SILENTINSTALL SURPRISEREMOVALOK
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27CC&SUBSYS_27CC8086&REV_01\3&2411E6FE&0&EF
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27CC&SUBSYS_27CC8086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27CC&SUBSYS_27CC8086
| | | | | ->PCI\VEN_8086&DEV_27CC&CC_0C0320
| | | | | ->PCI\VEN_8086&DEV_27CC&CC_0C03
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27CC&REV_01
| | | | | ->PCI\VEN_8086&DEV_27CC
| | | | | ->PCI\VEN_8086&CC_0C0320
| | | | | ->PCI\VEN_8086&CC_0C03
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_0C0320
| | | | | ->PCI\CC_0C03
| | | | | Location Information
| | | | | ->PCI bus 0, device 29, function 7
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
| | | | | Driver:
| | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0000
| | | | | Service:
| | | | | ->usbehci
| | | | | + DeviceID:
| | | | | | USB\ROOT_HUB20\4&141F8988&0
| | | | | | HardwareIDs:
| | | | | | ->USB\ROOT_HUB20&VID8086&PID27CC&REV0001
| | | | | | ->USB\ROOT_HUB20&VID8086&PID27CC
| | | | | | ->USB\ROOT_HUB20
| | | | | | Device Description:
| | | | | | ->USB Root Hub
| | | | | | Driver:
| | | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0008
| | | | | | Service:
| | | | | | ->usbhub
| | | | | | Capabilities: SURPRISEREMOVALOK
| | | | | | + DeviceID:
| | | | | | | USB\VID_058F&PID_6387\255875F4
| | | | | | | HardwareIDs:
| | | | | | | ->USB\Vid_058f&Pid_6387&Rev_0112
| | | | | | | ->USB\Vid_058f&Pid_6387
| | | | | | | CompatibleIDs:
| | | | | | | ->USB\Class_08&SubClass_06&Prot_50
| | | | | | | ->USB\Class_08&SubClass_06
| | | | | | | ->USB\Class_08
| | | | | | | Location Information
| | | | | | | ->Mass Storage
| | | | | | | Device Description:
| | | | | | | ->USB Mass Storage Device
| | | | | | | Driver:
| | | | | | | ->{36FC9E60-C465-11CF-8056-444553540000}\0025
| | | | | | | Service:
| | | | | | | ->USBSTOR
| | | | | | | Capabilities: REMOVABLE UNIQUEID
| | | | | | | + DeviceID:
| | | | | | | | USBSTOR\DISK&VEN_GENERIC&PROD_FLASH_DISK&REV_8.07\255875F4&0
| | | | | | | | HardwareIDs:
| | | | | | | | ->USBSTOR\DiskGeneric_Flash_Disk______8.07
| | | | | | | | ->USBSTOR\DiskGeneric_Flash_Disk______
| | | | | | | | ->USBSTOR\DiskGeneric_
| | | | | | | | ->USBSTOR\Generic_Flash_Disk______8
| | | | | | | | ->Generic_Flash_Disk______8
| | | | | | | | ->USBSTOR\GenDisk
| | | | | | | | ->GenDisk
| | | | | | | | CompatibleIDs:
| | | | | | | | ->USBSTOR\Disk
| | | | | | | | ->USBSTOR\RAW
| | | | | | | | Device Description:
| | | | | | | | ->Disk drive
| | | | | | | | Friendly Name:
| | | | | | | | ->Generic Flash Disk USB Device
| | | | | | | | Driver:
| | | | | | | | ->{4D36E967-E325-11CE-BFC1-08002BE10318}\0012
| | | | | | | | Service:
| | | | | | | | ->disk
| | | | | | | | Capabilities: UNIQUEID
| | | | | | | | + DeviceID:
| | | | | | | | | STORAGE\REMOVABLEMEDIA\7&1F313D74&0&RM
| | | | | | | | | HardwareIDs:
| | | | | | | | | ->STORAGE\Volume
| | | | | | | | | CompatibleIDs:
| | | | | | | | | ->STORAGE\Volume
| | | | | | | | | Device Description:
| | | | | | | | | ->Generic volume
| | | | | | | | | Driver:
| | | | | | | | | ->{71A27CDD-812A-11D0-BEC7-08002BE2092F}\0011
| | | | | | | | | Capabilities: SILENTINSTALL RAWDEVICEOK
| | | | | | | | | Drive Name D:
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_E1\3&2411E6FE&0&F0
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_E1
| | | | | ->PCI\VEN_8086&DEV_244E&SUBSYS_00000000
| | | | | ->PCI\VEN_8086&DEV_244E&REV_E1
| | | | | ->PCI\VEN_8086&DEV_244E
| | | | | ->PCI\VEN_8086&DEV_244E&CC_060401
| | | | | ->PCI\VEN_8086&DEV_244E&CC_0604
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&CC_060401
| | | | | ->PCI\VEN_8086&CC_0604
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_060401
| | | | | ->PCI\CC_0604
| | | | | Location Information
| | | | | ->PCI bus 0, device 30, function 0
| | | | | Device Description:
| | | | | ->Intel(R) 82801 PCI Bridge - 244E
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0016
| | | | | Service:
| | | | | ->pci
| | | | | + DeviceID:
| | | | | | PCI\VEN_104C&DEV_AC28&SUBSYS_00000000&REV_00\4&1AF1648C&0&28F0
| | | | | | HardwareIDs:
| | | | | | ->PCI\VEN_104C&DEV_AC28&SUBSYS_00000000&REV_00
| | | | | | ->PCI\VEN_104C&DEV_AC28&SUBSYS_00000000
| | | | | | ->PCI\VEN_104C&DEV_AC28&REV_00
| | | | | | ->PCI\VEN_104C&DEV_AC28
| | | | | | ->PCI\VEN_104C&DEV_AC28&CC_060400
| | | | | | ->PCI\VEN_104C&DEV_AC28&CC_0604
| | | | | | CompatibleIDs:
| | | | | | ->PCI\VEN_104C&CC_060400
| | | | | | ->PCI\VEN_104C&CC_0604
| | | | | | ->PCI\VEN_104C
| | | | | | ->PCI\CC_060400
| | | | | | ->PCI\CC_0604
| | | | | | Location Information
| | | | | | ->PCI bus 2, device 5, function 0
| | | | | | Device Description:
| | | | | | ->PCI standard PCI-to-PCI bridge
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0018
| | | | | | Service:
| | | | | | ->pci
| | | | | | + DeviceID:
| | | | | | | PCI\VEN_15BC&DEV_0505&SUBSYS_00000000&REV_00\5&34680ACF&0&0028F0
| | | | | | | HardwareIDs:
| | | | | | | ->PCI\VEN_15BC&DEV_0505&SUBSYS_00000000&REV_00
| | | | | | | ->PCI\VEN_15BC&DEV_0505&SUBSYS_00000000
| | | | | | | ->PCI\VEN_15BC&DEV_0505&REV_00
| | | | | | | ->PCI\VEN_15BC&DEV_0505
| | | | | | | ->PCI\VEN_15BC&DEV_0505&CC_0B4000
| | | | | | | ->PCI\VEN_15BC&DEV_0505&CC_0B40
| | | | | | | CompatibleIDs:
| | | | | | | ->PCI\VEN_15BC&CC_0B4000
| | | | | | | ->PCI\VEN_15BC&CC_0B40
| | | | | | | ->PCI\VEN_15BC
| | | | | | | ->PCI\CC_0B4000
| | | | | | | ->PCI\CC_0B40
| | | | | | | Location Information
| | | | | | | ->PCI bus 3, device 0, function 0
| | | | | | | Device Description:
| | | | | | | ->Agilent Technologies 16800/16900 Series Analyzer (PCI-to-SVY)
| | | | | | | Driver:
| | | | | | | ->{FA7119E6-CA6F-11D2-9B59-0060B0ECAA14}\0000
| | | | | | | Service:
| | | | | | | ->ag16900Svy
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01\3&2411E6FE&0&F8
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27B8&SUBSYS_00000000&REV_01
| | | | | ->PCI\VEN_8086&DEV_27B8&SUBSYS_00000000
| | | | | ->PCI\VEN_8086&DEV_27B8&REV_01
| | | | | ->PCI\VEN_8086&DEV_27B8
| | | | | ->PCI\VEN_8086&DEV_27B8&CC_060100
| | | | | ->PCI\VEN_8086&DEV_27B8&CC_0601
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&CC_060100
| | | | | ->PCI\VEN_8086&CC_0601
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_060100
| | | | | ->PCI\CC_0601
| | | | | Location Information
| | | | | ->PCI bus 0, device 31, function 0
| | | | | Device Description:
| | | | | ->Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0014
| | | | | Service:
| | | | | ->isapnp
| | | | | + DeviceID:
| | | | | | ISAPNP\READDATAPORT\0
| | | | | | HardwareIDs:
| | | | | | ->ISAPNP\ReadDataPort
| | | | | | CompatibleIDs:
| | | | | | Device Description:
| | | | | | ->ISAPNP Read Data Port
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0019
| | | | | | Capabilities: UNIQUEID SILENTINSTALL RAWDEVICEOK
| | | | | + DeviceID:
| | | | | | ACPI\PNP0C02\1
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0C02
| | | | | | ->*PNP0C02
| | | | | | Device Description:
| | | | | | ->Motherboard resources
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0024
| | | | | | Capabilities: UNIQUEID SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0000\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0000
| | | | | | ->*PNP0000
| | | | | | Device Description:
| | | | | | ->Programmable interrupt controller
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0021
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0200\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0200
| | | | | | ->*PNP0200
| | | | | | Device Description:
| | | | | | ->Direct memory access controller
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0027
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0100\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0100
| | | | | | ->*PNP0100
| | | | | | Device Description:
| | | | | | ->System timer
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0023
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0B00\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0B00
| | | | | | ->*PNP0B00
| | | | | | Device Description:
| | | | | | ->System CMOS/real time clock
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0025
| | | | | | Capabilities: SILENTINSTALL RAWDEVICEOK
| | | | | + DeviceID:
| | | | | | ACPI\PNP0800\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0800
| | | | | | ->*PNP0800
| | | | | | Device Description:
| | | | | | ->System speaker
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0026
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0C04\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0C04
| | | | | | ->*PNP0C04
| | | | | | Device Description:
| | | | | | ->Numeric data processor
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0022
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0501\1
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0501
| | | | | | ->*PNP0501
| | | | | | Device Description:
| | | | | | ->Communications Port
| | | | | | Friendly Name:
| | | | | | ->Communications Port (COM1)
| | | | | | Driver:
| | | | | | ->{4D36E978-E325-11CE-BFC1-08002BE10318}\0001
| | | | | | Service:
| | | | | | ->Serial
| | | | | | Capabilities: UNIQUEID SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0401\1
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0401
| | | | | | ->*PNP0401
| | | | | | Device Description:
| | | | | | ->ECP Printer Port
| | | | | | Friendly Name:
| | | | | | ->ECP Printer Port (LPT1)
| | | | | | Driver:
| | | | | | ->{4D36E978-E325-11CE-BFC1-08002BE10318}\0002
| | | | | | Service:
| | | | | | ->Parport
| | | | | | Capabilities: UNIQUEID SILENTINSTALL
| | | | | | + DeviceID:
| | | | | | | LPTENUM\MICROSOFTRAWPORT\5&35FB2AD7&0&LPT1
| | | | | | | HardwareIDs:
| | | | | | | ->LPTENUM\MicrosoftRawPort958A
| | | | | | | ->MicrosoftRawPort958A
| | | | | | | Location Information
| | | | | | | ->LPT1
| | | | | | | Device Description:
| | | | | | | ->Printer Port Logical Interface
| | | | | | | Driver:
| | | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0028
| | | | | | | Capabilities: SILENTINSTALL RAWDEVICEOK
| | | | | + DeviceID:
| | | | | | ACPI\PNP0F13\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0F13
| | | | | | ->*PNP0F13
| | | | | | Device Description:
| | | | | | ->PS/2 Compatible Mouse
| | | | | | Driver:
| | | | | | ->{4D36E96F-E325-11CE-BFC1-08002BE10318}\0000
| | | | | | Service:
| | | | | | ->i8042prt
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0303\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0303
| | | | | | ->*PNP0303
| | | | | | CompatibleIDs:
| | | | | | ->*PNP030B
| | | | | | Device Description:
| | | | | | ->Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
| | | | | | Driver:
| | | | | | ->{4D36E96B-E325-11CE-BFC1-08002BE10318}\0000
| | | | | | Service:
| | | | | | ->i8042prt
| | | | | | Capabilities: SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\PNP0C02\2
| | | | | | HardwareIDs:
| | | | | | ->ACPI\PNP0C02
| | | | | | ->*PNP0C02
| | | | | | Device Description:
| | | | | | ->Motherboard resources
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0017
| | | | | | Capabilities: UNIQUEID SILENTINSTALL
| | | | | + DeviceID:
| | | | | | ACPI\INT0800\4&1E5E1293&0
| | | | | | HardwareIDs:
| | | | | | ->ACPI\INT0800
| | | | | | ->*INT0800
| | | | | | Device Description:
| | | | | | ->Intel(R) 82802 Firmware Hub Device
| | | | | | Driver:
| | | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0020
| | | | | | Capabilities: SILENTINSTALL
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27DF&SUBSYS_27DF8086&REV_01\3&2411E6FE&0&F9
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27DF&SUBSYS_27DF8086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27DF&SUBSYS_27DF8086
| | | | | ->PCI\VEN_8086&DEV_27DF&CC_01018A
| | | | | ->PCI\VEN_8086&DEV_27DF&CC_0101
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27DF&REV_01
| | | | | ->PCI\VEN_8086&DEV_27DF
| | | | | ->PCI\VEN_8086&CC_01018A
| | | | | ->PCI\VEN_8086&CC_0101
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_01018A
| | | | | ->PCI\CC_0101
| | | | | Location Information
| | | | | ->PCI bus 0, device 31, function 1
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
| | | | | Driver:
| | | | | ->{4D36E96A-E325-11CE-BFC1-08002BE10318}\0000
| | | | | Service:
| | | | | ->pciide
| | | | | + DeviceID:
| | | | | | PCIIDE\IDECHANNEL\4&24EE2440&0&0
| | | | | | HardwareIDs:
| | | | | | ->Intel-27df
| | | | | | ->Primary_IDE_Channel
| | | | | | ->*PNP0600
| | | | | | CompatibleIDs:
| | | | | | ->*PNP0600
| | | | | | Location Information
| | | | | | ->Primary Channel
| | | | | | Device Description:
| | | | | | ->Primary IDE Channel
| | | | | | Driver:
| | | | | | ->{4D36E96A-E325-11CE-BFC1-08002BE10318}\0002
| | | | | | Service:
| | | | | | ->atapi
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27C0&SUBSYS_27C08086&REV_01\3&2411E6FE&0&FA
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27C0&SUBSYS_27C08086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27C0&SUBSYS_27C08086
| | | | | ->PCI\VEN_8086&DEV_27C0&CC_01018F
| | | | | ->PCI\VEN_8086&DEV_27C0&CC_0101
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27C0&REV_01
| | | | | ->PCI\VEN_8086&DEV_27C0
| | | | | ->PCI\VEN_8086&CC_01018F
| | | | | ->PCI\VEN_8086&CC_0101
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_01018F
| | | | | ->PCI\CC_0101
| | | | | Location Information
| | | | | ->PCI bus 0, device 31, function 2
| | | | | Device Description:
| | | | | ->Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
| | | | | Driver:
| | | | | ->{4D36E96A-E325-11CE-BFC1-08002BE10318}\0001
| | | | | Service:
| | | | | ->pciide
| | | | | + DeviceID:
| | | | | | PCIIDE\IDECHANNEL\4&2FBB2B14&0&0
| | | | | | HardwareIDs:
| | | | | | ->Intel-27c0
| | | | | | ->Primary_IDE_Channel
| | | | | | ->*PNP0600
| | | | | | CompatibleIDs:
| | | | | | ->*PNP0600
| | | | | | Location Information
| | | | | | ->Primary Channel
| | | | | | Device Description:
| | | | | | ->Primary IDE Channel
| | | | | | Driver:
| | | | | | ->{4D36E96A-E325-11CE-BFC1-08002BE10318}\0004
| | | | | | Service:
| | | | | | ->atapi
| | | | | | + DeviceID:
| | | | | | | IDE\DISKHITACHI_HDS721680PLA380_________________P21OABEA\5&30D7022D&0&0.0.0
| | | | | | | HardwareIDs:
| | | | | | | ->IDE\DiskHitachi_HDS721680PLA380_________________P21OABEA
| | | | | | | ->IDE\Hitachi_HDS721680PLA380_________________P21OABEA
| | | | | | | ->IDE\DiskHitachi_HDS721680PLA380_________________
| | | | | | | ->Hitachi_HDS721680PLA380_________________P21OABEA
| | | | | | | ->GenDisk
| | | | | | | CompatibleIDs:
| | | | | | | ->GenDisk
| | | | | | | Location Information
| | | | | | | ->0
| | | | | | | Device Description:
| | | | | | | ->Disk drive
| | | | | | | Friendly Name:
| | | | | | | ->Hitachi HDS721680PLA380
| | | | | | | Driver:
| | | | | | | ->{4D36E967-E325-11CE-BFC1-08002BE10318}\0007
| | | | | | | Service:
| | | | | | | ->disk
| | | | | | | Drive Name C:
| | | | | + DeviceID:
| | | | | | PCIIDE\IDECHANNEL\4&2FBB2B14&0&1
| | | | | | HardwareIDs:
| | | | | | ->Intel-27c0
| | | | | | ->Secondary_IDE_Channel
| | | | | | ->*PNP0600
| | | | | | CompatibleIDs:
| | | | | | ->*PNP0600
| | | | | | Location Information
| | | | | | ->Secondary Channel
| | | | | | Device Description:
| | | | | | ->Secondary IDE Channel
| | | | | | Driver:
| | | | | | ->{4D36E96A-E325-11CE-BFC1-08002BE10318}\0005
| | | | | | Service:
| | | | | | ->atapi
| | | | + DeviceID:
| | | | | PCI\VEN_8086&DEV_27DA&SUBSYS_27DA8086&REV_01\3&2411E6FE&0&FB
| | | | | HardwareIDs:
| | | | | ->PCI\VEN_8086&DEV_27DA&SUBSYS_27DA8086&REV_01
| | | | | ->PCI\VEN_8086&DEV_27DA&SUBSYS_27DA8086
| | | | | ->PCI\VEN_8086&DEV_27DA&CC_0C0500
| | | | | ->PCI\VEN_8086&DEV_27DA&CC_0C05
| | | | | CompatibleIDs:
| | | | | ->PCI\VEN_8086&DEV_27DA&REV_01
| | | | | ->PCI\VEN_8086&DEV_27DA
| | | | | ->PCI\VEN_8086&CC_0C0500
| | | | | ->PCI\VEN_8086&CC_0C05
| | | | | ->PCI\VEN_8086
| | | | | ->PCI\CC_0C0500
| | | | | ->PCI\CC_0C05
| | | | | Location Information
| | | | | ->PCI bus 0, device 31, function 3
| | | | | Device Description:
| | | | | ->Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0032
| | | | + DeviceID:
| | | | | ACPI\PNP0C02\4
| | | | | HardwareIDs:
| | | | | ->ACPI\PNP0C02
| | | | | ->*PNP0C02
| | | | | Device Description:
| | | | | ->Motherboard resources
| | | | | Driver:
| | | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0012
| | | | | Capabilities: UNIQUEID SILENTINSTALL
| | | + DeviceID:
| | | | ACPI\PNP0C01\2&DABA3FF&0
| | | | HardwareIDs:
| | | | ->ACPI\PNP0C01
| | | | ->*PNP0C01
| | | | Device Description:
| | | | ->System board
| | | | Driver:
| | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0010
| | | | Capabilities: SILENTINSTALL
| | | + DeviceID:
| | | | ACPI\PNP0C0B\2&DABA3FF&0
| | | | HardwareIDs:
| | | | ->ACPI\PNP0C0B
| | | | ->*PNP0C0B
| | | | Device Description:
| | | | ->ACPI Fan
| | | | Driver:
| | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0006
| | | | Capabilities: SILENTINSTALL RAWDEVICEOK
| | | + DeviceID:
| | | | ACPI\THERMALZONE\THRM
| | | | HardwareIDs:
| | | | ->ACPI\ThermalZone
| | | | ->*ThermalZone
| | | | Device Description:
| | | | ->ACPI Thermal Zone
| | | | Driver:
| | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0007
| | | | Capabilities: UNIQUEID SILENTINSTALL RAWDEVICEOK
| | | + DeviceID:
| | | | ACPI\FIXEDBUTTON\2&DABA3FF&0
| | | | HardwareIDs:
| | | | ->ACPI\FixedButton
| | | | ->*FixedButton
| | | | Device Description:
| | | | ->ACPI Fixed Feature Button
| | | | Driver:
| | | | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0009
| | | | Capabilities: SILENTINSTALL RAWDEVICEOK
| + DeviceID:
| | ROOT\DMIO\0000
| | HardwareIDs:
| | ->ROOT\DMIO
| | CompatibleIDs:
| | ->DETECTEDInternal\dmio
| | ->DETECTED\dmio
| | Device Description:
| | ->Logical Disk Manager
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0004
| | Service:
| | ->dmio
| | Capabilities: SILENTINSTALL RAWDEVICEOK
| + DeviceID:
| | ROOT\FTDISK\0000
| | HardwareIDs:
| | ->ROOT\FTDISK
| | CompatibleIDs:
| | ->DETECTEDInternal\ftdisk
| | ->DETECTED\ftdisk
| | Device Description:
| | ->Volume Manager
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0000
| | Service:
| | ->ftdisk
| | Capabilities: SILENTINSTALL RAWDEVICEOK
| | + DeviceID:
| | | STORAGE\VOLUME\1&30A96598&0&SIGNATURE43F043F0OFFSET7E00LENGTH12A1C90400
| | | HardwareIDs:
| | | ->STORAGE\Volume
| | | Device Description:
| | | ->Generic volume
| | | Driver:
| | | ->{71A27CDD-812A-11D0-BEC7-08002BE2092F}\0006
| | | Capabilities: SILENTINSTALL RAWDEVICEOK SURPRISEREMOVALOK
| | | Drive Name C:
| + DeviceID:
| | ROOT\LEGACY_AFD\0000
| | Device Description:
| | ->AFD
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0000
| | Service:
| | ->AFD
| + DeviceID:
| | ROOT\LEGACY_BEEP\0000
| | Device Description:
| | ->Beep
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0001
| | Service:
| | ->Beep
| + DeviceID:
| | ROOT\LEGACY_DMBOOT\0000
| | Device Description:
| | ->dmboot
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0002
| | Service:
| | ->dmboot
| + DeviceID:
| | ROOT\LEGACY_DMLOAD\0000
| | Device Description:
| | ->dmload
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0003
| | Service:
| | ->dmload
| + DeviceID:
| | ROOT\LEGACY_FIPS\0000
| | Device Description:
| | ->Fips
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0004
| | Service:
| | ->Fips
| + DeviceID:
| | ROOT\LEGACY_GPC\0000
| | Device Description:
| | ->Generic Packet Classifier
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0005
| | Service:
| | ->Gpc
| + DeviceID:
| | ROOT\LEGACY_HTTP\0000
| | Device Description:
| | ->HTTP
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0006
| | Service:
| | ->HTTP
| + DeviceID:
| | ROOT\LEGACY_IPNAT\0000
| | Device Description:
| | ->IP Network Address Translator
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0007
| | Service:
| | ->IpNat
| + DeviceID:
| | ROOT\LEGACY_IPSEC\0000
| | Device Description:
| | ->IPSEC driver
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0008
| | Service:
| | ->IPSec
| + DeviceID:
| | ROOT\LEGACY_KSECDD\0000
| | Device Description:
| | ->ksecdd
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0009
| | Service:
| | ->ksecdd
| + DeviceID:
| | ROOT\LEGACY_MNMDD\0000
| | Device Description:
| | ->mnmdd
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0010
| | Service:
| | ->mnmdd
| + DeviceID:
| | ROOT\LEGACY_MOUNTMGR\0000
| | Device Description:
| | ->mountmgr
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0011
| | Service:
| | ->mountmgr
| + DeviceID:
| | ROOT\LEGACY_NDIS\0000
| | Device Description:
| | ->NDIS System Driver
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0012
| | Service:
| | ->NDIS
| + DeviceID:
| | ROOT\LEGACY_NDISTAPI\0000
| | Device Description:
| | ->Remote Access NDIS TAPI Driver
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0013
| | Service:
| | ->NdisTapi
| + DeviceID:
| | ROOT\LEGACY_NDISUIO\0000
| | Device Description:
| | ->NDIS Usermode I/O Protocol
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0014
| | Service:
| | ->Ndisuio
| + DeviceID:
| | ROOT\LEGACY_NDPROXY\0000
| | Device Description:
| | ->NDProxy
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0015
| | Service:
| | ->NDProxy
| + DeviceID:
| | ROOT\LEGACY_NETBT\0000
| | Device Description:
| | ->NetBios over Tcpip
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0016
| | Service:
| | ->NetBT
| + DeviceID:
| | ROOT\LEGACY_NULL\0000
| | Device Description:
| | ->Null
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0017
| | Service:
| | ->Null
| + DeviceID:
| | ROOT\LEGACY_PARTMGR\0000
| | Device Description:
| | ->PartMgr
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0018
| | Service:
| | ->PartMgr
| + DeviceID:
| | ROOT\LEGACY_PARVDM\0000
| | Device Description:
| | ->ParVdm
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0019
| | Service:
| | ->ParVdm
| + DeviceID:
| | ROOT\LEGACY_RASACD\0000
| | Device Description:
| | ->Remote Access Auto Connection Driver
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0020
| | Service:
| | ->RasAcd
| + DeviceID:
| | ROOT\LEGACY_RDPCDD\0000
| | Device Description:
| | ->RDPCDD
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0021
| | Service:
| | ->RDPCDD
| + DeviceID:
| | ROOT\LEGACY_SI3112\0000
| | Device Description:
| | ->SiI-3512 SATALink Controller
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0022
| | Service:
| | ->SI3112
| + DeviceID:
| | ROOT\LEGACY_SIFILTER\0000
| | Device Description:
| | ->SATALink driver accelerator
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0023
| | Service:
| | ->SiFilter
| + DeviceID:
| | ROOT\LEGACY_TCPIP\0000
| | Device Description:
| | ->TCP/IP Protocol Driver
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0024
| | Service:
| | ->Tcpip
| + DeviceID:
| | ROOT\LEGACY_VGASAVE\0000
| | Device Description:
| | ->VgaSave
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0025
| | Service:
| | ->VgaSave
| + DeviceID:
| | ROOT\LEGACY_VOLSNAP\0000
| | Device Description:
| | ->VolSnap
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0026
| | Service:
| | ->VolSnap
| + DeviceID:
| | ROOT\LEGACY_WANARP\0000
| | Device Description:
| | ->Remote Access IP ARP Driver
| | Driver:
| | ->{8ECC055D-047F-11D1-A537-0000F8753ED1}\0027
| | Service:
| | ->Wanarp
| + DeviceID:
| | ROOT\MEDIA\MS_MMACM
| | HardwareIDs:
| | ->MS_MMACM
| | Device Description:
| | ->Audio Codecs
| | Driver:
| | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0002
| | Service:
| | ->audstub
| + DeviceID:
| | ROOT\MEDIA\MS_MMDRV
| | HardwareIDs:
| | ->MS_MMDRV
| | Device Description:
| | ->Legacy Audio Drivers
| | Driver:
| | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0004
| | Service:
| | ->audstub
| + DeviceID:
| | ROOT\MEDIA\MS_MMMCI
| | HardwareIDs:
| | ->MS_MMMCI
| | Device Description:
| | ->Media Control Devices
| | Driver:
| | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0000
| | Service:
| | ->audstub
| + DeviceID:
| | ROOT\MEDIA\MS_MMVCD
| | HardwareIDs:
| | ->MS_MMVCD
| | Device Description:
| | ->Legacy Video Capture Devices
| | Driver:
| | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0003
| | Service:
| | ->audstub
| + DeviceID:
| | ROOT\MEDIA\MS_MMVID
| | HardwareIDs:
| | ->MS_MMVID
| | Device Description:
| | ->Video Codecs
| | Driver:
| | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0001
| | Service:
| | ->audstub
| + DeviceID:
| | ROOT\MS_L2TPMINIPORT\0000
| | HardwareIDs:
| | ->ms_l2tpminiport
| | Device Description:
| | ->WAN Miniport (L2TP)
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0002
| | Service:
| | ->Rasl2tp
| + DeviceID:
| | ROOT\MS_NDISWANIP\0000
| | HardwareIDs:
| | ->ms_ndiswanip
| | Device Description:
| | ->WAN Miniport (IP)
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0006
| | Service:
| | ->NdisWan
| + DeviceID:
| | ROOT\MS_PPPOEMINIPORT\0000
| | HardwareIDs:
| | ->ms_pppoeminiport
| | Device Description:
| | ->WAN Miniport (PPPOE)
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0004
| | Service:
| | ->RasPppoe
| + DeviceID:
| | ROOT\MS_PPTPMINIPORT\0000
| | HardwareIDs:
| | ->ms_pptpminiport
| | Device Description:
| | ->WAN Miniport (PPTP)
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0003
| | Service:
| | ->PptpMiniport
| + DeviceID:
| | ROOT\MS_PSCHEDMP\0000
| | HardwareIDs:
| | ->ms_pschedmp
| | Device Description:
| | ->Packet Scheduler Miniport
| | Friendly Name:
| | ->WAN Miniport (IP) - Packet Scheduler Miniport
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0007
| | Service:
| | ->PSched
| + DeviceID:
| | ROOT\MS_PSCHEDMP\0001
| | HardwareIDs:
| | ->ms_pschedmp
| | Device Description:
| | ->Packet Scheduler Miniport
| | Friendly Name:
| | ->Intel(R) PRO/1000 PM Network Connection - Packet Scheduler Miniport
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0009
| | Service:
| | ->PSched
| + DeviceID:
| | ROOT\MS_PTIMINIPORT\0000
| | HardwareIDs:
| | ->ms_ptiminiport
| | Device Description:
| | ->Direct Parallel
| | Driver:
| | ->{4D36E972-E325-11CE-BFC1-08002BE10318}\0005
| | Service:
| | ->Raspti
| + DeviceID:
| | ROOT\RDPDR\0000
| | HardwareIDs:
| | ->ROOT\RDPDR
| | Device Description:
| | ->Terminal Server Device Redirector
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0029
| | Service:
| | ->rdpdr
| + DeviceID:
| | ROOT\RDP_KBD\0000
| | HardwareIDs:
| | ->ROOT\RDP_KBD
| | Device Description:
| | ->Terminal Server Keyboard Driver
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0031
| | Service:
| | ->TermDD
| + DeviceID:
| | ROOT\RDP_MOU\0000
| | HardwareIDs:
| | ->ROOT\RDP_MOU
| | Device Description:
| | ->Terminal Server Mouse Driver
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0030
| | Service:
| | ->TermDD
| + DeviceID:
| | ROOT\SYSTEM\0000
| | HardwareIDs:
| | ->root\swenum
| | Device Description:
| | ->Plug and Play Software Device Enumerator
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0001
| | Service:
| | ->swenum
| | + DeviceID:
| | | SW\{CD171DE3-69E5-11D2-B56D-0000F8754380}\{9B365890-165F-11D0-A195-0020AFD156E4}
| | | HardwareIDs:
| | | ->SW\{cd171de3-69e5-11d2-b56d-0000f8754380}
| | | Device Description:
| | | ->Microsoft WINMM WDM Audio Compatibility Driver
| | | Driver:
| | | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0015
| | | Service:
| | | ->wdmaud
| | | Capabilities: UNIQUEID SILENTINSTALL SURPRISEREMOVALOK
| | + DeviceID:
| | | SW\{A7C7A5B0-5AF3-11D1-9CED-00A024BF0407}\{9B365890-165F-11D0-A195-0020AFD156E4}
| | | HardwareIDs:
| | | ->SW\{a7c7a5b0-5af3-11d1-9ced-00a024bf0407}
| | | Device Description:
| | | ->Microsoft Kernel System Audio Device
| | | Driver:
| | | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0009
| | | Service:
| | | ->sysaudio
| | | Capabilities: UNIQUEID SILENTINSTALL SURPRISEREMOVALOK
| | + DeviceID:
| | | SW\{B7EAFDC0-A680-11D0-96D8-00AA0051E51D}\{9B365890-165F-11D0-A195-0020AFD156E4}
| | | HardwareIDs:
| | | ->SW\{b7eafdc0-a680-11d0-96d8-00aa0051e51d}
| | | Device Description:
| | | ->Microsoft Kernel Wave Audio Mixer
| | | Driver:
| | | ->{4D36E96C-E325-11CE-BFC1-08002BE10318}\0011
| | | Service:
| | | ->kmixer
| | | Capabilities: UNIQUEID SILENTINSTALL SURPRISEREMOVALOK
| + DeviceID:
| | ROOT\SYSTEM\0001
| | HardwareIDs:
| | ->root\update
| | Device Description:
| | ->Microcode Update Device
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0002
| | Service:
| | ->update
| + DeviceID:
| | ROOT\SYSTEM\0002
| | HardwareIDs:
| | ->root\mssmbios
| | Device Description:
| | ->Microsoft System Management BIOS Driver
| | Driver:
| | ->{4D36E97D-E325-11CE-BFC1-08002BE10318}\0003
| | Service:
| | ->mssmbios

 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
OK, I put the original hard drive back with Windows XP.  Here is the output of the walk:

Thanks. I'll take a closer look at that device list later and see if the Windows 7 version installed on the M890 motherboard includes drivers for all of the devices on the M880 motherboard, or if drivers for any of the devices would need to be found somewhere else.
 

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs
The following are my raw notes I took during the 16902B Win 7 upgrade with Agilent 5.90.x drivers and environment.  Kindly disregard any misspellings of this quick summary.  I also took many pictures but since I got it to work they probably are not needed anymore.

Original Installation:
16902B with 3 16755A cards, Windows XP SP2, Agilent Software 3.83.0001, 80 Gbyte Deskstar HD, M-880-Nitro motherboard, Intel Celeron D 3.2 GHz (Single Core), 2 GBytes RAM installed (4 512 Mbyte modules).

1.  I installing another hard drive into the 16902B, (an 80 GByte Western Digital), and restored the factory Windows XP environment using the 16902-14100.iso mentioned in this thread.
https://www.eevblog.com/forum/testgear/anyone-have-an-os-recovery-disc-for-an-agilent-16900b-series/msg2394207/
I burned the ISO to DVD and installed it using an external DVD drive via USB connection.  [I used a DVD drive from another PC and a USB to SATA adapter]).

2.  It took over an hour to restore…

3.  Once the Win XP environment is restored, verify the touch screen is working, from panel buttons, Agilent Software environment, external mouse, all other devices recognized.

4.  I then exported the following regkey from the Windows XP install environment (using regedit) to a USB flash drive:

[HKEY_LOCAL_MACHINE\SYSTEM\AgMachineInfo]
"Ag16900Standalone"=dword:00000001
"NoDisplaySwitching"="true"
"FrameModelNumber"="16902B"

5.  Now, from within the Windows XP environment, I installed Windows 7 Pro 32 bit (with SP1 already applied on the DVD) from the external DVD drive.  I choose not to keep previous files, etc...  it then will create a backup of the Windows XP environment and save it in windows.old folder.  Choose NO automatic updates, I will do this manually later.

6.  Ok, now with Windows 7 installed… Touch Screen doesn’t work properly, no problem, keep going.

7.  No need to enter Windows 7 license at this time, you will have 3 days to do it… keep going.

9.  Install network cable, enable automatic updates for Windows 7.  Install updates, 173 important updates, 6 optional (about 1 Gbytes total).  Lengthy process… update got stuck on me once and a few reboots…

10. Once, windows updates are complete… the original Touch Screen drivers on the Window XP install are from Hampshire Company, TSHARC.  For the most recent drivers, they are from Microchip TSHARC, below is the link.  Install the touch drivers and calibrate the screen and reboot… keep going.  (Run as administrator).

https://www.microchip.com/design-centers/tsharc/software-drivers-and-driver-manuals

11.  Now, this is required, (it won’t work without doing this)… import the registry key saved from Windows XP to the new Windows 7 environment using regedit.

12.  If you check device manager, you should have one outstanding device not found.  This will be resolved when you install the complete Agilent 16902B Drivers and Environment, version 5.90.x from B3764-14200-AS-05901104-RC.iso DVD.

https://www.keysight.com/main/software.jspx?ckey=2222812

In retrospect, the installation of the Windows XP restore disc in step 1 may not be needed, given the only thing needed from that installation is

A.   That specific Agilent registry key.
B.   The name of the drivers for the touch screen.

Great info on this thread.  The secret is the registry key (was it ingowien that mentioned it?)  Without that scrap of information, it will not work.

Everything seems to be working, include front panel buttons.  But…

1. The 16902B seems to not have any built-in speaker for sound?  I did get sound by connecting an external speaker to the back of the 16902B.
2.  No Agilent Screen Saver or background included with update?

Juan



« Last Edit: June 16, 2020, 05:31:50 pm by juan_ee »
 
The following users thanked this post: gslick

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
Good to know that your 16902B M880 motherboard upgrade to 32-bit Windows 7 Pro pretty much just worked without any real hassles.

You might want to look into replacing the (4x) 512MB memory with either (4x) 1GB or (2x) 2GB memory (not sure if both options work and if there would be any difference between the two) for a total of 4GB memory. The official Agilent/Keysight upgrade to Windows 7 upgraded the M880 motherboard to 4GB.
 

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs
Yeah gslick, I notice on the document you refer to "Keysight Technologies Windows 7 Upgrade Kits for 16800 Series, 16901A and 16902B Logic Analyzers" that the upgrade to Windows 7 for the M880 is to only add RAM and a Windows 7 hard drive but not upgrade the CPU.

That means the 3.2 GHz Celeron is adequate to handle Windows 7 (32 bit) and the Agilent software, no CPU upgrade required.  As long as I don't run other stuff at the same time as I run the analyzer, I might just be OK keeping the original Celeron CPU.

Perhaps Agilent was only adding the additional RAM to justify charging more money $$ .  I mean, why have the customer ship their 16902B to Agilent (which is a hassle, especially if you don't have the original box), then have Agilent's techs open up the case (which is another hassle) and ONLY upgrade the RAM but not upgrade the CPU if the CPU was inadequate?

 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
That means the 3.2 GHz Celeron is adequate to handle Windows 7 (32 bit) and the Agilent software, no CPU upgrade required.  As long as I don't run other stuff at the same time as I run the analyzer, I might just be OK keeping the original Celeron CPU.

On the logic analyzers with the M890 motherboard they run a 64-bit version of Windows 7. Unless someone happens to come across a logic analyzer with the M880 motherboard that had the official Agilent upgrade to Windows 7 and they can report what they find I don't know if the M880 was upgraded to a 32-bit or 64-bit version of Windows 7. The 2GB -> 4GB upgrade might make more difference on a 64-bit version than on a 32-bit version.

It might be interesting to see if something like a Core™2 Duo E6600 "Conroe" would work on the M880 motherboard. There is an E8400 "Wolfdale" on the M890 but that is a couple of years newer than the E6600 and possibly the E8400 might not be supported while the E6600 might be on the M880. Those CPUs seem to be pretty cheap now if you were up for trying that experiment.
 

Offline ingowienTopic starter

  • Regular Contributor
  • *
  • Posts: 61
  • Country: at
According to CPU-z it's a i945P/PL/G/GZ chipset.
945PL supports FSB533 and FSB800 and Pentium 4, D, and C2D
945P and 945G support FSB533, FSB800 and FSB1066, again P4, D and C2D where G ist the version with integrated graphic.
https://en.wikipedia.org/wiki/List_of_Intel_chipsets
A quick cross-check with e.g. the gigabyte compatibility list reveals that some of their boards support C2D, but only 2 to 5 out of 11.
https://www.gigabyte.com/Ajax/SupportFunction/GetCpuList?Value=23&SocketValue=377&Socket=Intel%20Socket%20775&Chipest=Intel%20945P&Type=Chipest
So personally I would definitely upgrade the CPU, the cost for a better processor is nothing compared to all the waiting with the old Celeron. I'd try one of the CPUs with compatiblity to most of the gigabyte boards or one of the old P4+HT CPUs. As this board will support FSB800, the list of CPUs will be much longer than for the i845 - as long as the BIOS supports Hyperthreading. 


 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
According to CPU-z it's a i945P/PL/G/GZ chipset.
945PL supports FSB533 and FSB800 and Pentium 4, D, and C2D
945P and 945G support FSB533, FSB800 and FSB1066, again P4, D and C2D where G ist the version with integrated graphic.
https://en.wikipedia.org/wiki/List_of_Intel_chipsets

From the M880 motherboard device list it contains this device:
Intel(R) 945G/GZ/P/PL Processor to I/O Controller - 2770
PCI\VEN_8086&DEV_2770&REV_02

That would be either an 82945G, 82945GZ, or an 82945GC Graphics and Memory Controller Hub (GMCH) which have Revision Number 02h, but not an 82945P nor an 82945PL Memory Controller Hub (MCH) which have revision number 81h.

For reference:
Intel® 945G/945GZ/945GC/945P/945PL Express Chipset Family Specification Update
For the Intel® 82945G/82945GZ/82945GC Graphics and Memory Controller Hub (GMCH)
and Intel® 82945P/82945PL Memory Controller Hub (MCH)
January 2007, Document Number: 307503-010
https://www.intel.com/Assets/PDF/specupdate/307503.pdf

Also the M880 motherboard contains this device:
Intel(R) 82945G Express Chipset Family
PCI\VEN_8086&DEV_2772&REV_02

That is the Integrated Graphics Device present in the 82945G Graphics and Memory Controller Hub (GMCH) but not present in the 82945P Memory Controller Hub (MCH).

The 82945G supports a 533/800/1066 MHz system bus and 4GB of memory while the 82945GC and 82945GZ only support a 533/800 MHz system bus and 2GB of memory.

If the M880 motherboard can be upgraded to 4GB of memory it must be an 82945G and it can't be an 82945GC nor an 82945GZ.

For reference:
Intel® 945G/945GZ/945GC/945P/945PL Express Chipset Family Datasheet
For the Intel® 82945G/82945GZ/82945GC Graphics and Memory Controller Hub (GMCH)
and Intel® 82945P/82945PL Memory Controller Hub (MCH)
June 2008, Document Number: 307502-005
https://www.intel.com/Assets/PDF/datasheet/307502.pdf
 

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs
Today, I was in the process of installing Windows 7 Pro 64 bit on a 3rd Hard Drive I have laying around since gslick mentioned  Analyzers which have the M890 motherboard did indeed have the 64 bit version install.

But as I was installing the 64 bit, I was reading the documentation for the Agilent 5.9 software.  It seems 5.9 is a native 32 bit application.

So, I decided NOT to install the 64 bit Windows.  I don't see any advantage in doing so... on the contrary, it seems the 64 bit version of Windows 7 runs 32 bit applications under some sort of emulation... perhaps requiring additional CPU and RAM resources.

So...  I am going to leave it Windows 7 32 bit.  Now, if I upgrade the hardware, it would be:

1.  SSD drive, the easiest upgrade.
2.  Additional RAM, I have 2 GBytes of RAM right now, 4 slots are all are taken (512 MBytes x 4).  An 3 GBytes may ok.  Someone mentioned that 4 GBytes may not be all usable.
3.  CPU upgrade.  I am going to have to spend some time to read the details in the research both of you (gslick and ingowien) have done, much appreciated for the info.

So, about the only thing I couldn't do is port the screen saver from the Windows XP machine to Windows 7  (I was expecting it to come with the Agilent software, but it wasn't).  The file in Windows XP I believe is agilent.scr .  It is an animation sequence with the Agilent logo.

Do any of you run an 169xx from factory with Windows 7?  Does it come with the animated screen saver?

Thanks  :)
 

Offline ingowienTopic starter

  • Regular Contributor
  • *
  • Posts: 61
  • Country: at
x32 bit apps in x64 Windows are not emulated, they run natively. They have their own x32-on-x64 subystem that is (geniously) called WoW64 which is Windows (32) on Windows 64. There are thunks to the 64 bit kernel and drivers that cost a little performance but it's not that bad. But you're right, on a machine with just 2GB or 4GB RAM there is no benefit of x64 except there are problems with older drivers.
I found several articles on XP screensavers in Win7, maybe you could one of these, e.g.
https://computerforumz.wordpress.com/2017/06/22/porting-windows-xp-screen-savers-to-windows-7-and-10/
I fould the screensaver issue, too. But I didn't try it as the only screen savers I use are monitor-off.
 

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs
I was able to port the Agilent animated screensaver to another Windows XP machine by moving a few registry keys, a DLL file and the Agilent.scr file.

But have not been able to get it to work on the 16902B running Windows 7.  Will try a few other things the next few days.

To change topics, does anyone use the 90 pin to flying leads like a E5382A ?  What adapters do you use?

Is there a 90 pin to 40 pin adapter to use the lower frequency 40 pin flying leads?
Juan
« Last Edit: June 16, 2020, 02:36:23 pm by juan_ee »
 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us

Do any of you run an 169xx from factory with Windows 7?  Does it come with the animated screen saver?


I have three 64-bit WS7E factory restore images for M890 motherboard versions of 16800A, 16901A, and 16902B logic analyzers. I just took a look and the Agilent logo screen saver does not appear to present in any of those factory restore images that I have.
 
The following users thanked this post: juan_ee

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
To change topics, does anyone use the 90 pin to flying leads like a E5382A ?  What adapters do you use?

Is there a 90 pin to 40 pin adapter to use the lower frequency 40 pin flying leads?

I have have a few 90-pin 16753A, 16754A, 16755A, or 16756A modules, I forget which and how many. I have never used them as I don't have any E5382A 90-pin flying lead sets and the asking price for the E5382A are crazy expensive.

Another option might be to use an E5380A 90-pin Mictor probe or an E5378A 90-pin Samtec probe and a breakout board for the Mictor or Samtec connector.  I have seen a few Mictor connector breakout boards listed on eBay, don't remember if I have seen Samtec connector breakout boards listed. Maybe it wouldn't be too difficult and expensive to layout your own breakout PCB and have some built.
 

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs

Do any of you run an 169xx from factory with Windows 7?  Does it come with the animated screen saver?


I have three 64-bit WS7E factory restore images for M890 motherboard versions of 16800A, 16901A, and 16902B logic analyzers. I just took a look and the Agilent logo screen saver does not appear to present in any of those factory restore images that I have.

Thanks for looking gslick and verifying it does not come installed.

 

Offline juan_ee

  • Contributor
  • Posts: 14
  • Country: us
    • JCA Design Labs
To change topics, does anyone use the 90 pin to flying leads like a E5382A ?  What adapters do you use?

Is there a 90 pin to 40 pin adapter to use the lower frequency 40 pin flying leads?

I have have a few 90-pin 16753A, 16754A, 16755A, or 16756A modules, I forget which and how many. I have never used them as I don't have any E5382A 90-pin flying lead sets and the asking price for the E5382A are crazy expensive.

Another option might be to use an E5380A 90-pin Mictor probe or an E5378A 90-pin Samtec probe and a breakout board for the Mictor or Samtec connector.  I have seen a few Mictor connector breakout boards listed on eBay, don't remember if I have seen Samtec connector breakout boards listed. Maybe it wouldn't be too difficult and expensive to layout your own breakout PCB and have some built.

Yeah, the E5382A is super expensive.

Yes, I did think about making an adapter board, not like the Mictor board you describe above (it seems there is one on eBay right now), but a direct 90 pin to 40 pin board.

The 16755A 90 pin female connector (on the cable) I believe is a custom Samtec connector.  A few days ago, I ordered engineering samples from Samtec for some 90 pin male headers that might just work.

« Last Edit: June 26, 2020, 05:40:36 pm by juan_ee »
 

Offline danielbriggs

  • Regular Contributor
  • *
  • Posts: 127
  • Country: gb
Apologies for bumping an older thread, but I feel it's relevant + not needing a new one of it's own.

Does anyone have a 16950A card to hand? If so, could you let me know the electrolytic capacitor value, rated voltage, diameter, height and lead spacing please; it would help me tremendously.  :-/O

1150718-0

Thanks in advance.
Dan
 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
Does anyone have a 16950A card to hand? If so, could you let me know the electrolytic capacitor value, rated voltage, diameter, height and lead spacing please; it would help me tremendously.  :-/O

It appears to be a Sanyo SP-Series 120μF 20V, which could be part number 20SP120M, with size code E, diameter 8mm, height 11.5mm, lead spacing 3.5mm.

Maybe a Nichicon PLX1D121MCL1 would be a suitable replacement.
120µF 20V Aluminum - Polymer Capacitors Radial, Can 27mOhm 3000 Hrs @ 125°C
« Last Edit: January 13, 2021, 08:49:54 pm by gslick »
 
The following users thanked this post: danielbriggs

Offline danielbriggs

  • Regular Contributor
  • *
  • Posts: 127
  • Country: gb
Thank you so much! I really appricate that.

I've got a 16950A sold as "for parts" coming on its way, and I'm going to attempt a repair. The board looked in good condition apart from one area. There looked some leaky damage and the cap to be non-original, so wanted to compare against a good card + swap out if needed to repair properly. 1150832-0.

The card is 64M "licenced" so I'm tempted to poke around and see if I can work out where the secret sauce is stored  :-/O

My 16902A chassis (with a 16910A) is on it's way too, so will get going on all of this when all the bits arrive.
It looks like an old XP P3 mobo, so am tempted to do as others have done and upgrade using a new motherboard, thanks to everyone in advance for posting restore tips / guides on similar work.

All the best,
Dan
 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
I've got a 16950A sold as "for parts" coming on its way, and I'm going to attempt a repair. The board looked in good condition apart from one area. There looked some leaky damage and the cap to be non-original, so wanted to compare against a good card + swap out if needed to repair properly.

Ah, eBay 274444686945. Shipping to you probably wasn't cheap so I hope it turns out to be functional.

The card is 64M "licenced" so I'm tempted to poke around and see if I can work out where the secret sauce is stored  :-/O

I haven't looked carefully at the various components near the FPGAs near the backplane connector. My guess is that there is an EEPROM somewhere containing the serial number and the installed license options. It would be interesting if someone figured out how that works from a hardware point of view, and also on the 16910A / 16911A modules.

From a software point of view, it's FlexLM  :-DD
 

Offline danielbriggs

  • Regular Contributor
  • *
  • Posts: 127
  • Country: gb
That's the one!
I'm up for doing what I can on the modules I've got, just to see if it's possible + if it helps anyone here.

@FlexLM... excellent! I'll be sure to try Option100!

All the best,
Dan
 

Offline gslick

  • Frequent Contributor
  • **
  • Posts: 579
  • Country: us
@FlexLM... excellent! I'll be sure to try Option100!

On the 16800 / 16900 series "Option100" is the "factory License" which appears to enable the software features such as the B4601C Serial to Parallel Analysis Package. I don't think it has any effect on the sample memory depth and state speed license options of the analyzer modules.
 

Offline ingowienTopic starter

  • Regular Contributor
  • *
  • Posts: 61
  • Country: at
I definitely would be interested in the 16950 license topic. I got two 16950A with 16M that could be uprgaded to 64M but Keysight refused to even discuss that.
Would you suggest to read the EEPROMs while powered by the 1690x (which probably would require soldering wires onto it) or trying some external supply?
 

Offline danielbriggs

  • Regular Contributor
  • *
  • Posts: 127
  • Country: gb
@ingowien

Would you be able to post an image of the restistor grids for both cards?
A/B   1/2/3/4 for your 16950A?
(Below R945, R944, R941)
Both of your 16950A's are 16M?


My 16950A arrived today (64M memory), so I can start working on this very soon.
« Last Edit: January 26, 2021, 11:05:09 pm by danielbriggs »
 

Offline ingowienTopic starter

  • Regular Contributor
  • *
  • Posts: 61
  • Country: at
As these cards can be upgraded in software, I don't think it has something to do with the resistors. This was the case for the old 1675x cards bot not for the 16950 cards. I think this has been mentioned somewhere in this forum but maybe in a different thread. However if it helps, I can send pictures of my cards.
best regards
Ingo
 

Offline danielbriggs

  • Regular Contributor
  • *
  • Posts: 127
  • Country: gb
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf