Author Topic: EZM328 Transistor checker firmware update (v1.13k)  (Read 89 times)

0 Members and 1 Guest are viewing this topic.

Offline cat101

  • Newbie
  • Posts: 1
  • Country: ar
EZM328 Transistor checker firmware update (v1.13k)
« on: October 12, 2020, 04:02:54 pm »
Hi. My transistor checker got burnt when trying to measure a charged cap  |O. Since I could not find a ready made firmware for my variant and it took me a while to figure out all the details, I wanted to post my build so that others could use it.

My tester was sold as: EZM328(GM328R) Transistor Tester ESR Meter Frequency Counter Signal Generator
On the boards you can see the following markings:
  • EZM328 V1.10 board (2015.08)
  • LCM_12864_V2.0
  • EZM Electronics Studio
The original firmware was: FW v1.13 (2017) by "EZM elec.studio"

After some work I determined that the FW variant I needed was "mega328_st7565". On the attachments you will find a ready built image (version 1.13k from SVN revision 854) and my modified Makefile.

In order to program it (with USBasp) I used these commands

Code: [Select]
TOOLDIR="/home/user/Applications/arduino/hardware/tools/avr"
AVRDUDE="$TOOLDIR/bin/avrdude -C $TOOLDIR/etc/avrdude.conf -c usbasp -p atmega328p"
IMAGEDIR="/tmp"
$AVRDUDE -U flash:w:$IMAGEDIR/mega328_st7565.hex:a -U eeprom:w:$IMAGEDIR/mega328_st7565.eep:a -U lfuse:w:0xF7:m -U hfuse:w:0xD9:m -U efuse:w:0xFC:m

Enjoy!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf