Products > Test Equipment
Someone has hacked MDO4000C?
<< < (6/18) > >>
Howardlong:

--- Quote from: supperman on December 23, 2019, 04:13:29 pm ---Thank you so much @Howardlong. That is super helpful.

So you made a small hardware device that runs your codes.. that is super cool!

Do you remember what python versions you are running to make it run? Operating system/python version/crypto version? (Edit: I see now there are links in the "link" on versions.. but probably still a good questions to ask)

So you would pay 2k to get rid of the red banner? :)  (Edit: A man with similar OCD as myself??)

Many thanks and happy holidays..

--- End quote ---

Python version was 2.7x but they seem to have the crypto included in some distros, certainly the one a did a few moths ago included it.

Regarding the 2k to “remove the banner”, it’s probably as much to do with resale value as it is my own OCD!
analogRF:

--- Quote from: abyrvalg on March 30, 2018, 11:24:18 pm ---https://0bin.net/paste/tZYZ4Fs5rjqvAoza#+yNeuILPU-nQmgFvDixaTsFyVclm2Mnh2gr2Id/aSBL

--- End quote ---

so is it possible to enable options on DPO4000 series, too?
analogRF:

--- Quote from: abyrvalg on March 30, 2018, 11:24:18 pm ---https://0bin.net/paste/tZYZ4Fs5rjqvAoza#+yNeuILPU-nQmgFvDixaTsFyVclm2Mnh2gr2Id/aSBL

--- End quote ---

can someone confirm if this works for DPO4000 series (non -B or -C), please?
tv84:
DPO4000 uses the same AES_key as DPO3000, so you can easily change the script to accommodate for it.

BTW:

dpo4kb_key = "\x2A\x62\x31\x9B\x7F\x06\x34\x2A\x90\x1F\x07\x64\x80\x6A\xDE\xC2"
mdo4kc_key= "\xC5\x6F\x22\xB2\x5E\x70\xF1\x30\xAF\x3E\xF3\x11\x88\x11\xBF\x1B"

Edit: If the mdo4kc_key in the python script is correct, then I must have something wrong in these 2 keys.

Maybe it's like this:

dpo4kb_key = FC A9 8B 9E EF FB 95 48 B1 ED F1 3A C4 09 83 75
analogRF:

--- Quote from: tv84 on August 28, 2020, 07:20:36 pm ---DPO4000 uses the same AES_key as DPO3000, so you can easily change the script to accommodate for it.

BTW:

dpo4kb_key = "\x2A\x62\x31\x9B\x7F\x06\x34\x2A\x90\x1F\x07\x64\x80\x6A\xDE\xC2"
mdo4kc_key= "\xC5\x6F\x22\xB2\x5E\x70\xF1\x30\xAF\x3E\xF3\x11\x88\x11\xBF\x1B"

--- End quote ---

I don't know any Python at all  :-//
So is it enough just to add/change these two lines :

--- Code: ---dpo4k_key = "\x9B\x31\x62\x2A\x2A\x34\x06\x7F\x64\x07\x1F\x90\xC2\xDE\x6A\x80" ---->>> same as DPO3000
:
:
:
keys = (("DPO4000", dpo4k_key),("MDO3000", mdo3k_key), ("DPO3000", dpo3k_key), ("MDO4000B", mdo4kb_key), ("MDO4000C", mdo4kc_key))

--- End code ---

or other changes are also needed?
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod