Products > Test Equipment
Someone has hacked MDO4000C?
<< < (11/18) > >>
analogRF:
for DPO/MSO/MDO4000 (no letter at the end) the "only" way is to program and then transfer license from an app module
It takes a while and needs many power on/offs but that's the only way  :(

syau:

--- Quote from: analogRF on October 31, 2020, 08:14:22 pm ---for DPO/MSO/MDO4000 (no letter at the end) the "only" way is to program and then transfer license from an app module
It takes a while and needs many power on/offs but that's the only way  :(

--- End quote ---

Quck hack using a broken phone + 24c02, job done in 2 hours  :-+

Thanks.
darkstar49:
an MDO4024C-6 just arrived... and luckily, the week-end just starts...   >:D

thus an MDO4024C with factory SA6, DPO4BND and AFG options.

but SCPI shell on port 4000 doesn't seem to work on MDO4000C  :(
Anyone experienced with the 'C' models ? This one is running FW 1.10 (2018), any idea whether it's a good idea to upgrade or not ?
Strange that netcat isn't working... console log reports daemon started on port 4000...?


Anyway... web console seems to work, additional menu's are there...
here some console file: (start of...)

 errSetConsoleLogState() logging to /usr/local/nv/consoleLog50.txt
 cfgInit
 versionBuildFWVersionString(): TimestampString: 30-Oct-15  11:43   
                                VersionFIRMWAREVERSIONversion: v1.02
                                Major ver num: 1 Minor ver num: 2
 sysInit
 execInit
 hwInit
 vertReprogramFeProc(): Platform Route66c fw 1003 filefw 1003
 Front Panel Firmware update not needed
   Current firmware 1003 >= 1003
 
Main Board HW ID: 0x07

 AFE Board SW ID: 0x02
 cfgGetRfHwInfo(): Contents of CfgRfHwInfo:
  rfHwPresent = 1; rfFrontEndType = 4; rfAfeRev = 2
  rfBw = 6e+09; rfLowBandStartFreq = 9000; rfAttenResolution = 1.000000
  rfAcqMemSize = 2e+09
 
Main Board SW ID: 0x01

       HFD144[0] ID_REG = 0x00001440
       HFD144[1] ID_REG = 0x00001440
       HFD144[2] ID_REG = 0x00001440
       HFD144[3] ID_REG = 0x00001440
 fanControlInit
     Init ADT7476.
 mitlInit
 afgInit
 diagInit
 diagRunEarlyPostDiags
 ialInit
 ialInit(): AFE id 0x2, rev 0x2, bI 8
 calInit
 Factory Checksum:
 Demux initialization
 
Main Board HW Rev: 0x02
Howardlong:
I think 1.10 is the latest firmware.

Check the

Utility -> I/O -> Socket Server

settings.



darkstar49:

--- Quote from: abyrvalg on April 03, 2018, 06:38:19 pm ---klaus11, for -C models the max possible bandwidth depends on actual board types installed. Try getting device log (as in andyturk's link) to see main/AFE models. There are both MB and AFE limits:

--- Code: ---afeid bw
1, 2 200M
3 1G
4 200M
5 350M
other 200M

mbid, bw
1, 5 1G-1G
2, 6 200M-500M
7 200M-1G

--- End code ---

--- End quote ---

AFE's always report a SW ID, whereas the main board reports a HW ID... so I'm not (yet) 100% convinced the AFE's can't be software-upgraded...
 
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod