Products > Test Equipment
Someone has hacked MDO4000C?
analogRF:
for DPO/MSO/MDO4000 (no letter at the end) the "only" way is to program and then transfer license from an app module
It takes a while and needs many power on/offs but that's the only way :(
syau:
--- Quote from: analogRF on October 31, 2020, 08:14:22 pm ---for DPO/MSO/MDO4000 (no letter at the end) the "only" way is to program and then transfer license from an app module
It takes a while and needs many power on/offs but that's the only way :(
--- End quote ---
Quck hack using a broken phone + 24c02, job done in 2 hours :-+
Thanks.
darkstar49:
an MDO4024C-6 just arrived... and luckily, the week-end just starts... >:D
thus an MDO4024C with factory SA6, DPO4BND and AFG options.
but SCPI shell on port 4000 doesn't seem to work on MDO4000C :(
Anyone experienced with the 'C' models ? This one is running FW 1.10 (2018), any idea whether it's a good idea to upgrade or not ?
Strange that netcat isn't working... console log reports daemon started on port 4000...?
Anyway... web console seems to work, additional menu's are there...
here some console file: (start of...)
errSetConsoleLogState() logging to /usr/local/nv/consoleLog50.txt
cfgInit
versionBuildFWVersionString(): TimestampString: 30-Oct-15 11:43
VersionFIRMWAREVERSIONversion: v1.02
Major ver num: 1 Minor ver num: 2
sysInit
execInit
hwInit
vertReprogramFeProc(): Platform Route66c fw 1003 filefw 1003
Front Panel Firmware update not needed
Current firmware 1003 >= 1003
Main Board HW ID: 0x07
AFE Board SW ID: 0x02
cfgGetRfHwInfo(): Contents of CfgRfHwInfo:
rfHwPresent = 1; rfFrontEndType = 4; rfAfeRev = 2
rfBw = 6e+09; rfLowBandStartFreq = 9000; rfAttenResolution = 1.000000
rfAcqMemSize = 2e+09
Main Board SW ID: 0x01
HFD144[0] ID_REG = 0x00001440
HFD144[1] ID_REG = 0x00001440
HFD144[2] ID_REG = 0x00001440
HFD144[3] ID_REG = 0x00001440
fanControlInit
Init ADT7476.
mitlInit
afgInit
diagInit
diagRunEarlyPostDiags
ialInit
ialInit(): AFE id 0x2, rev 0x2, bI 8
calInit
Factory Checksum:
Demux initialization
Main Board HW Rev: 0x02
Howardlong:
I think 1.10 is the latest firmware.
Check the
Utility -> I/O -> Socket Server
settings.
darkstar49:
--- Quote from: abyrvalg on April 03, 2018, 06:38:19 pm ---klaus11, for -C models the max possible bandwidth depends on actual board types installed. Try getting device log (as in andyturk's link) to see main/AFE models. There are both MB and AFE limits:
--- Code: ---afeid bw
1, 2 200M
3 1G
4 200M
5 350M
other 200M
mbid, bw
1, 5 1G-1G
2, 6 200M-500M
7 200M-1G
--- End code ---
--- End quote ---
AFE's always report a SW ID, whereas the main board reports a HW ID... so I'm not (yet) 100% convinced the AFE's can't be software-upgraded...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version