Author Topic: Source for GW-Instek GOS-6101 Service / User Manual  (Read 1480 times)

0 Members and 1 Guest are viewing this topic.

Offline MannyTCTopic starter

  • Newbie
  • Posts: 4
  • Country: us
Source for GW-Instek GOS-6101 Service / User Manual
« on: September 29, 2017, 05:46:44 am »
Hi, does anyone have any leads on where I can find the service and/or user manual for a GWInstek GOS-6101? Been looking for a while but have struck out.
 

Offline MannyTCTopic starter

  • Newbie
  • Posts: 4
  • Country: us
Re: Source for GW-Instek GOS-6101 Service / User Manual
« Reply #1 on: October 04, 2017, 05:42:47 am »
Does anyone have any ideas on other sources? I contacted the manufacturer but they didn't even seem to want to entertain looking in their archives for me.
 

Offline sprintcarfan

  • Contributor
  • Posts: 16
  • Country: us
Re: Source for GW-Instek GOS-6101 Service / User Manual
« Reply #2 on: October 04, 2017, 06:40:19 pm »
I assume you've seen this auction?

http://www.ebay.com/itm/Instruction-manual-with-Schematics-for-GW-GOM-801G-GOOD-WILL-/282158074826

About halfway down in the description they list a schematic for the 6101, but they might also have the service manual.
 
The following users thanked this post: MannyTC

Offline MannyTCTopic starter

  • Newbie
  • Posts: 4
  • Country: us
Re: Source for GW-Instek GOS-6101 Service / User Manual
« Reply #3 on: October 05, 2017, 05:43:50 am »
I assume you've seen this auction?

http://www.ebay.com/itm/Instruction-manual-with-Schematics-for-GW-GOM-801G-GOOD-WILL-/282158074826

About halfway down in the description they list a schematic for the 6101, but they might also have the service manual.

Thanks, I had not seen that. Don't know how I missed it with all the searching I have been doing. I sent a message to the seller to see what they have available.
 

Offline Bjoern

  • Contributor
  • Posts: 40
  • Country: sg
Re: Source for GW-Instek GOS-6101 Service / User Manual
« Reply #4 on: April 22, 2020, 05:22:36 am »
Hi Manny, Did you manage to find the service manual for the GOS-6191 scope ?
I also have a problem with it, all the keypad LEDs are blinking the the beam does what it wants.
Would you mind sharing if you have advice or schematic ?
bg@bgcontrol.com
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf