Products > Test Equipment
SPD3303X-E
(1/3) > >>
BillyO:
There does not seem to be a general thread on these power supplies, so I thought I'd start one with a generic enough title to serve as such.

That said, I do have a question.

I know you can series the two main supplies in this unit to get 64V.  My question is, can you then manually series the auxiliary supply to get a total of 69V @ 3.2A?
modoran:
No, the 3rd channel is not galvanically isolated, it is derived from the 2nd channel.
Performa01:

--- Quote from: modoran on April 28, 2023, 07:44:31 am ---No, the 3rd channel is not galvanically isolated, it is derived from the 2nd channel.

--- End quote ---
You seem to confuse this with Rigol or something.

On the Siglent SPD3303X/X-E, all three power sources are independent and galvanically isolated.

So the final answer is: yes, we can!
tautech:
And with a fresh reply from Siglent this picture is proof, admittedly it is a SPD3303C with wired series connections however it clearly shows the 3rd channel with a 5V setting used in the series chain.
alm:

--- Quote from: Performa01 on April 28, 2023, 08:50:10 am ---You seem to confuse this with Rigol or something.

On the Siglent SPD3303X/X-E, all three power sources are independent and galvanically isolated.

--- End quote ---
Indeed, Rigol has a fully adjustable third channel that's not isolated from channel 2, while Siglent has an extremely limited third channel that's fully isolated.
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod