EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: DG41WV on August 18, 2018, 02:46:08 pm

Title: Spectrum analyzer VBW filter question. (need to add filter to saved data)
Post by: DG41WV on August 18, 2018, 02:46:08 pm

Hi, I'm currently having a problem with finding the power of some frequencies that I captured through a spectrum analyzer (anritsu MS2036C). In the spectrum analyzer I have set the RBW to 300Hz and VBW to 1kHz. when I'm viewing the saved data through the analyzer the distance between 2 frequencies are 1kHz, but when I import the saved data to the PC the spacing is 300Hz. How do I convert it to 1kHz spacing? I don't know much about signal processing and any help would be appreciated.