| Products > Test Equipment |
| SSA3015X Plus remote file access |
| (1/1) |
| Ross:
Hi Everyone, I am probably missing something very obvious, but for the life of me I can't seem to work out how to get access to the Siglent Spectrum anayliser file system. I would like to get the test results and spectrum save on the unit. I have had a look at the manual and the web doesn't help. Anyone know how to do this, Thanks, Ross |
| tautech:
--- Quote from: Ross on March 02, 2023, 04:40:24 am ---Hi Everyone, I am probably missing something very obvious, but for the life of me I can't seem to work out how to get access to the Siglent Spectrum anayliser file system. I would like to get the test results and spectrum save on the unit. I have had a look at the manual and the web doesn't help. Anyone know how to do this, Thanks, Ross --- End quote --- Press File to enter the File Manager UI. Then select View All to see all files saved in the Local file system. Select/highlight files of interest and press Copy then select your USB stick and Paste the file to USB. Rinse and repeat. Tips Here I use a USB hub to allow for a mouse and USB stick connected into the one USB port these are equipped with. |
| Ross:
Hi, Thanks for your response, so there is no way to get the files over LAN or USB host? Thanks, Ross |
| hendorog:
Hi Ross, You should be able to access it via FTP. Sorry not around an instrument for a while but hopefully that will help you figure it out. |
| Ross:
--- Quote from: hendorog on March 03, 2023, 12:31:27 am ---Hi Ross, You should be able to access it via FTP. Sorry not around an instrument for a while but hopefully that will help you figure it out. --- End quote --- Thanks that is exactly what I am looking for, surprised it is not mentioned in the manual, perhaps I was looking at the wrong one. |
| Navigation |
| Message Index |