Products > Test Equipment

SSA3015X Plus remote file access

(1/1)

Ross:
Hi Everyone,

I am probably missing something very obvious, but for the life of me I can't seem to work out how to get access to the Siglent Spectrum anayliser file system. I would like to get the test results and spectrum save on the unit. I have had a look at the manual and the web doesn't help.

Anyone know how to do this,

Thanks,

Ross

tautech:

--- Quote from: Ross on March 02, 2023, 04:40:24 am ---Hi Everyone,

I am probably missing something very obvious, but for the life of me I can't seem to work out how to get access to the Siglent Spectrum anayliser file system. I would like to get the test results and spectrum save on the unit. I have had a look at the manual and the web doesn't help.

Anyone know how to do this,

Thanks,

Ross

--- End quote ---
Press File to enter the File Manager UI.
Then select View All to see all files saved in the Local file system.
Select/highlight files of interest and press Copy then select your USB stick and Paste the file to USB.
Rinse and repeat.

Tips
Here I use a USB hub to allow for a mouse and USB stick connected into the one USB port these are equipped with.

Ross:
Hi,

Thanks for your response, so there is no way to get the files over LAN or USB host?

Thanks,

Ross

hendorog:
Hi Ross,
You should be able to access it via FTP.
Sorry not around an instrument for a while but hopefully that will help you figure it out.

Ross:

--- Quote from: hendorog on March 03, 2023, 12:31:27 am ---Hi Ross,
You should be able to access it via FTP.
Sorry not around an instrument for a while but hopefully that will help you figure it out.

--- End quote ---

Thanks that is exactly what I am looking for, surprised it is not mentioned in the manual, perhaps I was looking at the wrong one.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod