Products > Test Equipment
TC1 lcr-meter transistor-tester fix
madires:
To make the TC1/T7 compatible with the reference design you can replace U4 with the two-transistor circuit or reprogram U4 (https://github.com/atar-axis/tc1-u4). For the fuse bits simply run "make fuses" after editing the Makefile (both OSHW firmwares).
distefanom:
Hi, Madires
If I don't want to do the MAKEFILE, since I Have eXtreme Burner only in my PC,
(see the attached image)
Do you know what values I should put in the Fusemap, so the uP can be reprogrammed anytime?
Please let me know
ciao
Mario
madires:
For ATmega324 and 16 MHz quartz crystal:
- hfuse 0xd9
- efuse 0xfc
- lfuse 0xf7
distefanom:
Thanks, Madires !!! ^-^ ^-^ ^-^
I'm missing "Lock fuse" and "calibration"
Leaving them as FF and blank is enough?
:-+ :-+ :-+
madires:
Yep, simply ignore those two.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version