Products > Test Equipment
TC1 lcr-meter transistor-tester fix
distefanom:
Sorry Madires, for my deep ignorance, so I still need help.
Keep in mind that my Transistortester is a TC1, which has an ATmega324 @ 16 MHz quartz crystal (see the enclosed shot of it, my previous posts you can see the PCB) and I have an old Win7 PC:
- I don't even know how to download ANY of those files from Github: even though, I'm a registered user, I can't find any "download" on any of those pages.
- I don't have any idea on how to compile the sources (if I could eventually download any of them) to have the right .eep and .hex files I need, to send to the micro via eXtreme burner.
I'm not a developer, so I don't know how to "makefile" these...
Could you or someone else help me with this harassment, since I would like simply to have those .eep and .hex files even the first edition is enough for me?
Many thanks
belzrebuth:
To download you have to get to the master folder:
https://github.com/madires/Transistortester-Warehouse
and press code (green button).
I imagine that you need to have WinAVR or mingw64 or maybe both to be able to "make"..
Anyways I did run the command with default settings and I attached the output files (.eep and .hex).
Hope it helps you.
edit:
Default settings shouldn't work for because I just saw that default frequency is 8MHz..
Hmm..
I should recompile with 16MHz and reupload..
I could also wait for you to edit the Makefile to your needs and compile with that one maybe?
Let me know how I can be of help.
madires:
Go to https://github.com/madires/Transistortester-Warehouse/blob/master/Firmware/m-firmware/ComponentTester-1.45m.tgz and click "Download" at the right side while not being logged in. And for getting started please see https://github.com/madires/Transistortester-Warehouse/blob/master/Documentation/English/FAQ.Feliciano.pdf. There's a ready-to-use k-firmware for the T7 (https://github.com/kubi48/TransistorTester-source/tree/master/trunk/mega644_T7_Mod) which could possibly also work with the TC1.
belzrebuth:
--- Quote from: madires on March 19, 2022, 01:12:56 pm ---There's a ready-to-use k-firmware for the T7 (https://github.com/kubi48/TransistorTester-source/tree/master/trunk/mega644_T7_Mod) which could possibly also work with the TC1.
--- End quote ---
Just tried to upload it to my TC1 and I bricked it so I don't think that firmware works with the TC1...
Is there any other .hex that can restore it now that I did what I did?
indman:
--- Quote from: madires on March 19, 2022, 01:12:56 pm ---There's a ready-to-use k-firmware for the T7 (https://github.com/kubi48/TransistorTester-source/tree/master/trunk/mega644_T7_Mod) which could possibly also work with the TC1.
--- End quote ---
Madires, k-firmware works only for ATMega644, it is not suitable for ATMega324.
--- Quote from: belzrebuth on March 19, 2022, 01:23:41 pm ---Just tried to upload it to my TC1 and I bricked it so I don't think that firmware works with the TC1...
Is there any other .hex that can restore it now that I did what I did?
--- End quote ---
Here is a ready-made working firmware for the clone TC1 and ATMega324
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version