Products > Test Equipment
TC1 lcr-meter transistor-tester fix
madires:
--- Quote from: indman on March 19, 2022, 02:09:45 pm ---
--- Quote from: madires on March 19, 2022, 01:12:56 pm ---There's a ready-to-use k-firmware for the T7 (https://github.com/kubi48/TransistorTester-source/tree/master/trunk/mega644_T7_Mod) which could possibly also work with the TC1.
--- End quote ---
Madires, k-firmware works only for ATMega644, it is not suitable for ATMega324.
--- End quote ---
My bad. Some TC1s come with an ATmega324, some with an 644. MCU lottery. :) This is one of the reasons I don't provide any ready-to-use firmwares. There are simply too many hardware variations to cover.
distefanom:
Hi Indman!
thanks for your efforts, but the link you provided me won't me download it, since it says the file is too big and I need Yandex installed.
Which I did, but the installation program says that this program can't run in my region (Italy).
BTW the processor inside my TC1 is an Atmega324, as I said several times.
Personally, I don't think the .eep and .hex files should be so big, so maybe a direct link anywhere would be good enough.
distefanom:
Hi Indman. Sorry I didn't recognize it |O
I successful programmed it in the Atmega 324. But I get kinda bootloop (see attached images) showing the first, then the second an then again the first
Also seems to me that the image is shifted 2 dots left and 2 dots up in respect of the display itself.
What's the meaning of the number shown?
indman:
--- Quote from: distefanom on March 19, 2022, 04:24:32 pm ---What's the meaning of the number shown?
--- End quote ---
This means that your device has a problem. Read advice from other owners on how to fix it.
belzrebuth:
--- Quote from: indman on March 19, 2022, 02:09:45 pm ---Here is a ready-made working firmware for the clone TC1 and ATMega324
--- End quote ---
Mine has a 644 and I think I already have v1.34 somewhere, I was hoping for a newer edition of the m-firmware.
I guess I need to roll my own..
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version