| Products > Test Equipment |
| TC1 lcr-meter transistor-tester fix |
| << < (49/80) > >> |
| madires:
Erase the whole ATmega to reset the lock fuse. Then set h-fuse 0xd9, l-fuse 0xf7 and e-fuse 0xfc. After that program the firmware (flash & EEPROM). |
| Nokeshas:
done, still the same, lcd only lights up on pressing button and thats it. |
| madires:
The pin assignment for the power control could be incorrect. AFAIK, it should be PB1. |
| Nokeshas:
i got LCR-TC1(T7)ATMega328DIP firmware since my board is with ATMega328DIP. Flashed atmega, but display is show wrong and its not like original firmware that was before with graphics not only text. Is there a way to put atmega324 firmware to armega328p? |O Actually the best help would be to get files for avrdude to program it, i have tried to read about something like makefile, but cant understand there anything since i do not have resource for starting up linux os.... maybe someone can help me regarding this? My TC1 model is with dip ATMEGA328P. Thanks in advance |
| madires:
The display offsets are a bit off. You can't simply progam an ATmega328 with a 324 firmware as they have different port pins (need to be adapted). The AVR tool chain is also available for Windows, and there's Microchip's IDE too. |
| Navigation |
| Message Index |
| Next page |
| Previous page |