Products > Test Equipment
TC1 lcr-meter transistor-tester fix
<< < (53/80) > >>
galaga1982:
I think it's low drop out too, but I'm not sure if it's caused the mcu to fail. There was no back light problem before the disaster.
digik:
I have this version:



after testing one charged cap is dead. I have dead short betweed D1 terminals.
I have removed D1, D2, C3, C25 and C30, same result.
I removed 78L05 and is still dead with a short between D1 terminal.

Is MCU bad?

madires:
Yes, most likely. BTW, that MCU is an LGT8F328.
digik:
is there a reliable way to test if is the MCU?

also seems that the LGT8F328 version is the highest specs one but also the only one without schematic available
madires:
Power the tester by a lab PSU and look for hot components. Proper testers come with an genuine ATmega.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod