Products > Test Equipment
TC1 lcr-meter transistor-tester fix
madires:
The Chinese clone manufacturers usually set the lock bits to prevent the firmware being read. I haven't seen any available copy of the T7's modified firmware so far.
indman:
acerquax,madires, usually the circuit design of the T7 and TC1 clones with the ATmega324 and the STC controller is the same, so the original Chinese firmware can be found on my resource https://yadi.sk/d/yW8xa5NJgUo5z in the folder LCR-TC1/Firmware/Original ;)
But since this firmware, apart from the presence of beautiful graphics, has no more advantages compared to m-firmware and k-firmware, and on the contrary, has many bugs and shortcomings, I recommend installing it only to check the functionality of the tester. Chinese firmware it is unsuitable for correct work with most parts.
acerquax:
indman, madires, thanks a lot for your inputs :-+ :-+ :clap:
Ehmmm...
ATmega 324<-->Atmega644 1:1 replaceable? Are there pincompatible for the T7-pcb or do I have to modity the T7 pcb?
madires:
Yep, they are pin-compatible.
acerquax:
:-+ :-+ :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version