Products > Test Equipment
TC1 lcr-meter transistor-tester fix
<< < (79/80) > >>
Kim Christensen:
Don't forget that you have to program 3 things in the atmega324pa:
Fuses
Flash memory
EEPROM memory

If you forget to program the EEPROM memory, then you can also get a white screen or other problems.
tedris:
When I compile the code, 2 files are created. One is ComponentTester.hex and the other is ComponentTester.eep. I load both of them. I saw that everyone has set the fuse settings differently. I don't understand what my setting should be?
SA:
Does the IR Decoder should look like this :-//? Is it possible to get Hexadecimal code?
madires:
It's an unsupported protocol:

--- Quote ---For a unknown protocol the tester displays the number of pauses and pulses, the duration of the first pulse and the first pause in units of 50µs:
  ? <pulses>:<first pulse>-<first pause>

--- End quote ---
SA:
I have tried more than 20 remote. I think the problem is firmware related. Can you please check that... Also compiler output shows this.. (I tried 1.45m, 1.47m, 1.48m,1.53m)
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod