Products > Test Equipment
TDS3000 Series Error Codes
(1/1)
daveyk:
TDS3000 Series Error Codes do not appear to be the op or service manual.  I have one TDS3052 that every so often after being off for a while, produces an error code 14 when booting up.  It is fine after that and the error doesn't seem to reproduce.

I am leaning towards a floppy drive error, maybe RTC Error (I have one scope, not sure which one, without the RTC Chip upgrade). Diags do not repeat error.  I only see the error on a power-up and there are many instances of ERROR 14 in the error log.   This does not seem to affect the operation of the scope.

Dave
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod