Author Topic: TDS3000 Series Error Codes  (Read 409 times)

0 Members and 1 Guest are viewing this topic.

Offline daveykTopic starter

  • Frequent Contributor
  • **
  • Posts: 421
  • Country: us
TDS3000 Series Error Codes
« on: November 01, 2023, 01:41:07 pm »
TDS3000 Series Error Codes do not appear to be the op or service manual.  I have one TDS3052 that every so often after being off for a while, produces an error code 14 when booting up.  It is fine after that and the error doesn't seem to reproduce.

I am leaning towards a floppy drive error, maybe RTC Error (I have one scope, not sure which one, without the RTC Chip upgrade). Diags do not repeat error.  I only see the error on a power-up and there are many instances of ERROR 14 in the error log.   This does not seem to affect the operation of the scope.

Dave
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf