Products > Test Equipment

TDS3000 Series Error Codes

(1/1)

daveyk:
TDS3000 Series Error Codes do not appear to be the op or service manual.  I have one TDS3052 that every so often after being off for a while, produces an error code 14 when booting up.  It is fine after that and the error doesn't seem to reproduce.

I am leaning towards a floppy drive error, maybe RTC Error (I have one scope, not sure which one, without the RTC Chip upgrade). Diags do not repeat error.  I only see the error on a power-up and there are many instances of ERROR 14 in the error log.   This does not seem to affect the operation of the scope.

Dave

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod