Products > Test Equipment
TDS5054B SSD Swap-in Fail
<< < (5/5)
daveyk:
"A Notice,  NV-variant, it means: You got a TDS5054B without touch. "

My TDS5054B-NV-AV" does indeed have touch and it works.  I still prefer to use the mouse.

Dave
uccoskun:
I'm writing just in case somebody ends up here to find an upgrade solutions.

I upgraded my tds5054b-NV to XP on an intel motherboard (Intel DQ77MK Motherboard). There is another tread by Strick here where he explains how to do it step by step.
Joebeazelman:
As the famous saying goes, "keep scope alive!"

I started another thread on documenting TDS5000/TLS5000 motherboards and the upgrade process. Head over to:

https://www.eevblog.com/forum/repair/help-with-replace-tektronix-tla5000tds5000-motherboard/?topicseen
Jamieson:
We have quite a few of these TDS5054B-NV-T scopes still kicking around in the lab and they are all pushing 20 years old now. So far the only failures I've encountered are the 70x70x15 CPU fan bearings and the 80GB PATA IDE hard drives.

We replace the drives with 128GB SATA SSDs. I also get the bootup BSOD when I attempt to use drives larger than ~250GB, suspect some LBA issue going on with the Windows 2000 drivers.

Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod