| Products > Test Equipment |
| Teardown - Hitachi V1065 |
| << < (10/18) > >> |
| true:
Don't hold the selector down, keep pressing the selector down. It will be a while before photos. Had a major burglary. Scope and cameras weren't stolen but other electronics things like parts and my soldering iron were, and the cameras to secure the house (to be installed the evening of the burglary) were stolen too so I am going to be delayed for a while. |
| Spork Schivago:
I'm sorry to bring up a dead thread but I have one of these scopes too, Hitachi V-1065A. The rocker switch was bad as well on mine. It'd go up and down but no middle (S1603 AL2S-2M). I'm pretty sure I found a replacement on Digikey, the exact replacement I mean, where you don't need to order a minimum of 50 of them. Is this it? http://www.digikey.com/product-detail/en/ALE1D-2M4-10-Z/563-1201-ND/1792105 Only reason I'm posting is in case other people come across this thread like I did using google looking for the exact same replacement switch. I hope it helps someone besides me out! |
| Spork Schivago:
I also believe this is the replacement plastic cover part for it: http://www.digikey.com/product-detail/en/140000050624/563-1204-ND/1792108 |
| rbm:
--- Quote from: Spork Schivago on May 26, 2015, 05:01:20 pm --- I'm pretty sure I found a replacement on Digikey, ... ALE1D-2M4-10-Z/563-1201-ND/1792105 --- End quote --- Unfortunately, the one you've pointed to is a SPDT switch. It has the proper physical body dimensions however it doesn't replace a DPDT, centre off switch used in the scope. The part number you supplied decomposes to: ALE=Lever action 1=1 pole D=ON-ON 2=PC terminal M=standard The NKK switch I spec'ed out in an earlier post is the correct one. The Copal original is special order only from Digikey. |
| Spork Schivago:
--- Quote from: rbm on May 26, 2015, 07:08:58 pm --- --- Quote from: Spork Schivago on May 26, 2015, 05:01:20 pm --- I'm pretty sure I found a replacement on Digikey, ... ALE1D-2M4-10-Z/563-1201-ND/1792105 --- End quote --- Unfortunately, the one you've pointed to is a SPDT switch. It has the proper physical body dimensions however it doesn't replace a DPDT, centre off switch used in the scope. The part number you supplied decomposes to: ALE=Lever action 1=1 pole D=ON-ON 2=PC terminal M=standard The NKK switch I spec'ed out in an earlier post is the correct one. The Copal original is special order only from Digikey. --- End quote --- Thank you for breaking that down for me! I really appreciate it! Man, I really thought that was it. I tried going to the one you speced out earlier but I couldn't find the part number. When I clicked the link you had up, it gave me a 404. I went to their website and clicked on the data sheet, it gave me a 404 too (from Copal's website). |
| Navigation |
| Message Index |
| Next page |
| Previous page |