| Products > Test Equipment |
| Teardown - Hitachi V1065 |
| << < (12/18) > >> |
| AF6LJ:
Thanks everyone for sharing this was a great thread. |
| rbm:
joneggert, that switch appears as though it will work, electrically and mechanically. The difference between it and the one I bought is the toggle handle; your switch has a standard metal bat handle. I checked the same part number on Digikey and it is currently in stock as well. |
| pascal_sweden:
Why does the scope have such a long winded grey cable inside? That winded cable on the right seems miles long :) |
| rbm:
The wound cable is a delay line to give the delay triggering feature of the scope. |
| grumpydoc:
--- Quote from: rbm on November 28, 2015, 03:00:00 pm ---The wound cable is a delay line to give the delay triggering feature of the scope. --- End quote --- Not quite, it is a delay line but not to give the delayed trigger. It is there so that you can see the edge on which the scope triggered for fast signals, most good quality higher bandwidth (certainly anything > 100MHz) analogue 'scopes have them. |
| Navigation |
| Message Index |
| Next page |
| Previous page |