| Products > Test Equipment |
| Teardown - Hitachi V1065 |
| << < (13/18) > >> |
| rbm:
Ah, ok. Thanks for correcting me. |
| Robinrayner:
Hi I used to sell these scopes when I worked at stc instrument services sold well against them and I liked them a lot. Back then the trigger lock was a big plus for some users. I have one now an ex demo unit that saw very little use. But the uncal knob on the channel a attenuator is broken off. I have removed the board and undone the circlip at the pot end so its an easy task to change it.but making one is a bit of a challenge.just wondered if you might sell me one off your parts scope? I live down in France. By the way I think we used to charge quite a lot extra for the a option. Never new it was that easy to change! Done mine while apart thanks to your info many thanks. Might even be able to find an old cat here somewhere. |
| old gregg:
Hi, I need to change 3 push/pull pot on my HITACHI VC-6023, instead of creating a new thread I ask here. The reference in the service manual are EVHYK3325B14 which is 10K push pull. Does anyone know the manufacter or a suitable replacement ? |
| ulyanoff:
Thank you for your work on Hitachi 1565 - it's great! Tell me in the photo there is a highlight of some buttons of the oscilloscope itself, this is tuning or there is such a modification. Look at the photo. Thank you . |
| grumpydoc:
--- Quote from: ulyanoff on August 04, 2018, 07:52:02 pm ---Thank you for your work on Hitachi 1565 - it's great! Tell me in the photo there is a highlight of some buttons of the oscilloscope itself, this is tuning or there is such a modification. Look at the photo. Thank you . --- End quote --- The 'scope didn't have a cover on when I took that photo - it's just light from above shining through the PCB in the 'scope. |
| Navigation |
| Message Index |
| Next page |
| Previous page |