Products > Test Equipment
Teardown of an appliance tester BBC Metrawatt Metratester 3
(1/1)
WackyGerman:
Here are some pictures of my teardown of the BBC Metratester 3 appliance tester . On the pictures you can see the multiple board construction of this unit . What a hell if you have to repair it  >:D .
SeanB:
Lovely power devices in there, have not seen those cans for a long time.
WackyGerman:
yes old stuff from the 1970`s . This good old puppy still works . The measuring voltage for the isolation test ist still roundabout 740 VDC and the scale shows the value of 10 MOhms when testing the voltage with a digital multimeter
de.boer:
Hallo WackyGerman,
ich las im Forum Du bist ein Besitzer eines BBC Metrawatt Metratester-3.
Auch ich habe solch ein Gerät.
Leider ist bei meinem  der Printtransformator defekt und ich kann kein Originaltrafo mehr zur Reparatur auftreiben.
Mein Plan ist eine Reparatur mit mehreren Standard-Transformatoren.
Dafür müsste ich die Ausgansspannungen kennen.
Ich hätte eine Bitte:
Würdest Du bitte für mich an Deinem Gerät ausmessen welche Sekundärspannungen der Trafo hat?
Da gibt es drei Sekundarwicklungen, eine mit einer Anzapfung - also benötige ich die vier AC-Spannungswerte.
Auch bei der Primärwicklung gibt es drei Anschlüsse - einer ist unterbrochen. :-(   :-[
Hast Du eine Idee wofür der dritte Primäranschluss ist?
VG  van de.boer
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod