EEVblog Electronics Community Forum
Products => Test Equipment => Topic started by: Jwalling on September 28, 2018, 11:30:02 am
-
Hi,
Does anyone happen to have the pinout for the console port on a Tek DPO4000 / MSO4000? I believe that it's J501.
https://www.eevblog.com/forum/repair/tektronix-dpo4054-stucked-at-tektronix-splash-screen/ (https://www.eevblog.com/forum/repair/tektronix-dpo4054-stucked-at-tektronix-splash-screen/)
I've PM'd him, but so far no reply...
This DPO4034 doesn't even get the splash screen. Code appears to be executing from the boot flash. All internal voltages are good.
Thanks!
-
Did you find out where the serial console port is located?
I have a similar issue with a DPO4054 :palm:
-
Did you find out where the serial console port is located?
I have a similar issue with a DPO4054 :palm:
Never heard back, I ended up selling it for parts.
Still would love to find out, though...
-
Sorry for reviving this old thread but it was never officially answered and I wanted future users to have less of a headache finding the answer. This is the most straight-forward thread on the subject.
Answer provided by ApertureScience in thread https://www.eevblog.com/forum/repair/tektronix-dpo4054-stucked-at-tektronix-splash-screen/25/ (https://www.eevblog.com/forum/repair/tektronix-dpo4054-stucked-at-tektronix-splash-screen/25/)
The Tx Pin is located on the 20-pin connector at the bottom. With the screen facing up, its the 2nd pin in the first row...
I confirmed this worked on my MSO4104.
-
This post also contains an image of the connector, and documents ground as the third pin.
https://www.eevblog.com/forum/repair/tektronix-dpo4054-stucked-at-tektronix-splash-screen/msg3916490/#msg3916490 (https://www.eevblog.com/forum/repair/tektronix-dpo4054-stucked-at-tektronix-splash-screen/msg3916490/#msg3916490)